dsPIC33FJ64GP202

产品特性
  • Up to 40 MIPS operation (at 3.0-3.6V): Industrial temperature range (-40°C to +85°C) Extended temperature range (-40°C to +125°C)
  • Industrial temperature range (-40°C to +85°C)
  • Extended temperature range (-40°C to +125°C)
  • Modified Harvard architecture
  • C compiler optimized instruction set
  • 16-bit wide data path
  • 24-bit wide instructions
  • Linear program memory addressing up to 4M instruction words
  • Linear data memory addressing up to 64 Kbytes
  • 83 base instructions: mostly 1 word/1 cycle
  • Two 40-bit accumulators with rounding and saturation options
  • Flexible and powerful addressing modes: Indirect Modulo Bit-Reversed
  • Indirect
  • Modulo
  • Bit-Reversed
  • Software stack
  • 16 x 16 fractional/integer multiply operations
  • 32/16 and 16/16 divide operations
  • Single-cycle multiply and accumulate: Accumulator write back for DSP operations Dual data fetch
  • Accumulator write back for DSP operations
  • Dual data fetch
  • Up to ±16-bit shifts for up to 40-bit data
  • Flash program memory
  • Data SRAM
  • Boot, Secure, and General Security for program Flash
  • 8-channel hardware DMA
  • Up to 2 Kbytes dual ported DMA buffer area (DMA RAM) to store data transferred via DMA: Allows data transfer between RAM and a peripheral while CPU is executing code (no cycle stealing)
  • Allows data transfer between RAM and a peripheral while CPU is executing code (no cycle stealing)
  • Most peripherals support DMA
  • Timer/Counters, up to five 16-bit timers: Can pair up to make two 32-bit timers One timer runs as a Real-Time Clock with an external 32.768 kHz oscillator Programmable prescaler
  • Can pair up to make two 32-bit timers
  • One timer runs as a Real-Time Clock with an external 32.768 kHz oscillator
  • Programmable prescaler
  • Input Capture (up to four channels): Capture on up, down or both edges 16-bit capture input functions 4-deep FIFO on each capture
  • Capture on up, down or both edges
  • 16-bit capture input functions
  • 4-deep FIFO on each capture
  • Output Compare (up to four channels): Single or Dual 16-bit Compare mode 16-bit Glitchless PWM mode
  • Single or Dual 16-bit Compare mode
  • 16-bit Glitchless PWM mode
  • Hardware Real-Time Clock/Calendar (RTCC): Provides clock, calendar, and alarm functions
  • Provides clock, calendar, and alarm functions
  • 5-cycle latency
  • 118 interrupt vectors
  • Up to 49 available interrupt sources
  • Up to three external interrupts
  • Seven programmable priority levels
  • Five processor exceptions
  • Peripheral pin Select functionality
  • Up to 35 programmable digital I/O pins
  • Wake-up/Interrupt-on-Change for up to 21 pins
  • Output pins can drive from 3.0V to 3.6V
  • Up to 5V output with open drain configuration
  • All digital input pins are 5V tolerant
  • 4 mA sink on all I/O pins
  • Flexible clock options: External, crystal, resonator, internal RC Fully integrated Phase-Locked Loop (PLL) Extremely low jitter PLL
  • External, crystal, resonator, internal RC
  • Fully integrated Phase-Locked Loop (PLL)
  • Extremely low jitter PLL
  • Power-up Timer
  • Oscillator Start-up Timer/Stabilizer
  • Watchdog Timer with its own RC oscillator
  • Fail-Safe Clock Monitor
  • Reset by multiple sources
  • On-chip 2.5V voltage regulator
  • Switch between clock sources in real time
  • Idle, Sleep, and Doze modes with fast wake-up
  • 10-bit, 1.1 Msps or 12-bit, 500 Ksps conversion: Two and four simultaneous samples (10-bit ADC) Up to 13 input channels with auto-scanning Conversion start can be manual or synchronized with one of four trigger sources Conversion possible in Sleep mode ±2 LSb max integral nonlinearity ±1 LSb max differential nonlinearity
  • Two and four simultaneous samples (10-bit ADC)
  • Up to 13 input channels with auto-scanning
  • Conversion start can be manual or synchronized with one of four trigger sources
  • Conversion possible in Sleep mode
  • ±2 LSb max integral nonlinearity
  • ±1 LSb max differential nonlinearity
  • Codec interface
  • Supports I2S and AC.97 protocols
  • Up to 16-bit data words, up to 16 words per frame
  • 4-word deep TX and RX buffers
  • Two analog comparators with programmable input/output configuration
  • Low-power, high-speed Flash technology
  • Fully static design
  • 3.3V (±10%) operating voltage
  • Industrial and Extended temperature
  • Low power consumption
  • 4-wire SPI (up to two modules): Framing supports I/O interface to simple codecs Supports 8-bit and 16-bit data Supports all serial clock formats and sampling modes
  • Framing supports I/O interface to simple codecs
  • Supports 8-bit and 16-bit data
  • Supports all serial clock formats and sampling modes
  • I2C.: Full Multi-Master Slave mode support 7-bit and 10-bit addressing Bus collision detection and arbitration Integrated signal conditioning Slave address masking
  • Full Multi-Master Slave mode support
  • 7-bit and 10-bit addressing
  • Bus collision detection and arbitration
  • Integrated signal conditioning
  • Slave address masking
  • UART (up to two modules): Interrupt on address bit detect Interrupt on UART error Wake-up on Start bit from Sleep mode 4-character TX and RX FIFO buffers LIN bus support IrDA® encoding and decoding in hardware High-Speed Baud mode Hardware Flow Control with CTS and RTS
  • Interrupt on address bit detect
  • Interrupt on UART error
  • Wake-up on Start bit from Sleep mode
  • 4-character TX and RX FIFO buffers
  • LIN bus support
  • IrDA® encoding and decoding in hardware
  • High-Speed Baud mode
  • Hardware Flow Control with CTS and RTS
  • Parallel Master Slave Port (PMP/EPSP): Supports 8-bit or 16-bit data Supports 16 address lines
  • Supports 8-bit or 16-bit data
  • Supports 16 address lines
  • Programmable Cyclic Redundancy Check (CRC): Programmable bit lengt
  • Programmable bit lengt
技术参数
Parameter Name Value Value
Architecture 16-bit 16-bit
CPU Speed (MIPS) 40 40
Memory Type Flash Flash
Program Memory (KB) 64 64
RAM Bytes 8,192 8,192
Temperature Range C -40 to 125 -40 to 125
Operating Voltage Range (V) 3 to 3.6 3 to 3.6
I/O Pins 21 21
Pin Count 28 28
System Management Features BOR BOR
POR Yes Yes
WDT Yes Yes
nanoWatt Features Fast Wake/Fast Control Fast Wake/Fast Control
Digital Communication Peripherals 2-UART2-SPI1-I2C 2-UART2-SPI1-I2C
Codec Interface Yes Yes
Comparators 2 2
USB (ch, speed, compliance) 0, None, 0, None,
CAN (#, type) 0 None 0 None
Capture/Compare/PWM Peripherals 4/4 4/4
PWM Resolution bits 16 16
Timers 5 x 16-bit 2 x 32-bit 5 x 16-bit 2 x 32-bit
Parallel Port PMP PMP
DMA 8 8
Cap Touch Channels 10 10
文档资料
dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04 and dsPIC33FJ128GPX02/X04 Data SheetData Sheets04/19/20126182KB
dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04 and dsPIC33FJ128GPX02/X04 Family ErrErrata08/05/2013160KB
16-bit MCU and DSC Programmer's Reference ManualProgramming Specification02/25/201310777KB
dsPIC33F/PIC24H Flash Programming SpecificationProgramming Specification10/19/20101322KB
AN1044 - Data Encryption Routines for PIC24 and dsPIC DevicesAppNote03/01/2013347KB
AN1045 - File I/O Functions Using Microchip's Memory Disk Drive File System LibraryAppNote05/02/2014350KB
AN1069 - Using C30 Compiler and the SPI module to Interface EEPROMs with dsPIC33F and PIC24FAppNote11/27/2007370KB
AN1071 - IrDA Standard Stack for Microchip 16-Bit and 32-bit MCUsAppNote12/07/2010716KB
AN1079 - Using the C30 Compiler and the I2C? Peripheral to Interface Serial EEPROMs with dsPIC33FAppNote03/16/2007515KB
AN1094 - Bootloader for dsPIC30F/33F and PIC24F/24H DevicesAppNote05/18/2007413KB
AN1096 - Using the C30 Compiler to Interface SPI Serial EEPROMs with dsPIC33AppNote11/08/2007367KB
AN1100 - Using the C30 Compiler to Interface Serial EEPROMs with dsPIC33FAppNote06/28/2007416KB
AN1115 - Implementing Digital Lock-In Amplifiers Using the dsPIC DSCAppNote10/19/2007392KB
AN1152 - Achieving Higher ADC Resolution Using OversamplingAppNote01/22/2008337KB
AN1204 - Microchip MiWi P2P Wireless ProtocolAppNote11/16/2010417KB
AN1210 - Using External Memory with PIC24F/24H/dsPIC33F DevicesAppNote07/15/2008240KB
AN1227 - Using a Keyboard with the Microchip Graphics LibraryAppNote03/28/2010150KB
AN1229 - Class B Safety Software Library for PIC MCUs and dsPIC DSCsAppNote04/24/2012439KB
AN1236 - Using C30 and a Timer to Interface dsPIC33 DSCs and PIC24 MCUs with UNI/O(R) Bus-Compatible Serial EEPROMsAppNote10/30/2008264KB
AN1249 - ECAN Operation with DMA on dsPIC33F and PIC24H DevicesAppNote02/13/2009460KB
AN699 - Anti-Aliasing, Analog Filters for Data Acquisition SystemsAppNote07/26/1999171KB
16-bit Embedded Control Solutions BrochureBrochures06/29/20157978KB
Electronic Solutions for Medical and FitnessBrochures09/10/201410216KB
MPLAB® X IDE Product OverviewSell Sheets07/11/2011182KB
dsPIC33/PIC24 FRM, I2CReference Manual03/18/2014668KB
dsPIC33/PIC24 FRM, Output CompareReference Manual03/13/2014322KB
dsPIC33/PIC24 FRM, Serial Peripheral Interface (SPI)Reference Manual05/28/2014281KB
dsPIC33/PIC24 FRM, UARTReference Manual03/14/2014467KB
Section 02. CPU - dsPIC33F FRMReference Manual01/03/2014664KB
Section 03. Data Memory - dsPIC33F/PIC24H FRMReference Manual01/06/2014227KB
Section 04. Program Memory - dsPIC33F/PIC24H FRMReference Manual01/06/2014332KB
Section 05. Flash Programming - dsPIC33F/PIC24H FRMReference Manual01/03/2014348KB
Section 08. Reset - dsPIC33F FRMReference Manual01/06/2014146KB
Section 09. Watchdog Timer and Power-Saving Modes - dsPIC33F/PIC24H FRMReference Manual01/03/2014356KB
Section 10. I/O Ports - dsPIC33F/PIC24H FRMReference Manual01/03/2014321KB
Section 11. Timers - dsPIC33F/PIC24H FRMReference Manual01/03/2014446KB
Section 12. Input Capture - dsPIC33F FRMReference Manual01/03/2014211KB
Section 16. Analog-to-Digital Converter (ADC) - dsPIC33F/PIC24H FRMReference Manual01/03/20141417KB
Section 20. Data Converter Interface (DCI) - dsPIC33F FRMReference Manual01/06/2014532KB
Section 21. Enhanced Controller Area Network (ECAN) - dsPIC33F/PIC24H FRMReference Manual01/03/20141088KB
Section 23. CodeGuard Security - dsPIC33F/PIC24H FRMReference Manual01/03/20141032KB
Section 24. Programming and Diagnostics - dsPIC33F/PIC24H FRMReference Manual01/03/2014392KB
Section 25. Device Configuration - dsPIC33F/PIC24H FRMReference Manual01/06/2014132KB
Section 26. Development Tool Support - dsPIC33F FRMReference Manual01/06/2014130KB
Section 30. I/O Ports with Peripheral Pin Select (PPS) - dsPIC33F/PIC24H FRMReference Manual01/03/2014530KB
Section 31. Introduction (Part III) - dsPIC33F FRMReference Manual01/03/201494KB
Section 32. Interrupts (Part III) - dsPIC33F/PIC24H FRMReference Manual01/03/2014860KB
Section 33. Audio Digital-to-Analog Converter (DAC) - dsPIC33F FRMReference Manual01/03/2014205KB
Section 34. Comparator - dsPIC33F FRMReference Manual01/03/2014169KB
Section 35. Parallel Master Port (PMP) - dsPIC33F/PIC24H FRMReference Manual02/03/2014514KB
Section 36. Programmable Cyclic Redundancy Check (CRC) - dsPIC33F FRMReference Manual01/03/2014178KB
Section 37. Real-Time Clock and Calendar (RTCC) - dsPIC33F/PIC24H FRMReference Manual01/03/2014494KB
Section 38. Direct Memory Access (DMA) (Part III) - dsPIC33F/PIC24H FRMReference Manual01/03/20141122KB
Section 39. Oscillator (Part III) - dsPIC33F FRMReference Manual01/03/2014440KB
Program Executive RIPE_01b_000033Software12/08/20143KB
PIC24HJ128GP502 BSDL fileBoundaryScanBSDL10/12/20128KB
CE100 - Using A/D Converters and DSP Library for Signal FilteringCode Examples08/17/2009425KB
CE101 - Configuring 10-bit A/D Converters for 1MSPS Conversion RateCode Examples09/12/201126KB
CE102 - Performing A/D Conversions in SLEEP (Low-Power) ModeCode Examples08/17/200920KB
CE103 - Implementing DOZE Mode for Dynamic CPU Power ControlCode Examples12/10/200933KB
CE104 - Dynamic Clock Switching for Low Power OperationCode Examples08/17/200916KB
CE105 - Address Error Traps for Easy DebuggingCode Examples08/17/200913KB
CE106 - Math Error Traps for Robust OperationCode Examples12/10/200931KB
CE107 - Stack Error Traps for Easy DebuggingCode Examples08/17/200915KB
CE108 - Oscillator Failure Traps and Failsafe Clock MonitoringCode Examples08/17/200916KB
CE109 - Run-Time Self Programming of FLASH Program MemoryCode Examples08/17/200920KB
CE110 - Dynamic Tuning of Internal Fast RCCode Examples08/17/200917KB
CE111 - External Interrupt Pins Configuration and UseCode Examples08/17/200918KB
CE112 - Fast Wake-up From Sleep ModeCode Examples08/17/200911KB
CE113 - Timer1 used in Real-Time Clock ApplicationsCode Examples08/17/200933KB
CE114 - Using the DMA with the UART in Loopback modeCode Examples08/17/200914KB
CE115 - Example of Handling a DMA TrapCode Examples12/10/200937KB
CE116 - Using the DMA with the SPI moduleCode Examples08/17/200919KB
CE117 - Using the DMA with DCI peripheral for I2S driverCode Examples09/12/201123KB
CE118 - Using FIR Filters From dsPIC Filter Design and DSP LibraryCode Examples08/17/200918KB
CE119 Interfacing to I2C Serial EEPROM using I2C peripheralCode Examples08/17/200917KB
CE120 A/D Conversions with Scanning through selected Analog Inputs with DMACode Examples08/17/200925KB
CE121 A/D Conversions with Scanning through selected Analog Inputs without DMACode Examples08/17/200921KB
CE122 - ADC Alternate SamplingCode Examples08/17/200920KB
CE123 - CodeGuard(TM) Security: segment creation and code placementCode Examples09/15/200929KB
CE124 - CodeGuard(TM) Security: Program flow changes between segmentsCode Examples09/15/200936KB
CE127 - Crosswire Communication between ECAN 1 and ECAN 2 modulesCode Examples08/17/200945KB
CE128 - ECAN FIFO Receive ExampleCode Examples04/27/200950KB
CE129 - ECAN Remote Transmission RequestCode Examples08/17/200944KB
CE132 - Si3000 DriverCode Examples12/10/200934KB
CE135 - SPI DemoCode Examples08/17/200920KB
CE136 - SPI without DMACode Examples08/17/200931KB
CE137 - UART without DMACode Examples08/17/200913KB
CE138 - SPI with two slavesCode Examples12/10/200945KB
CE139 - 10-bit ADC Sampling at 2.2MSPSCode Examples12/10/2009150KB
CE140 - Inverse tangent operation using CORDIC iterative approximationCode Examples12/10/200943KB
CE141 - SPI with Framed modeCode Examples12/10/200946KB
CE142 - Open Drain configurationCode Examples12/10/200942KB
CE143 - Using Timer1 for Period InterruptsCode Examples08/17/200955KB
CE145 - Using I2C module as a Slave deviceCode Examples12/10/200932KB
CE146 - Adaptive Notch FilterCode Examples12/10/200937KB
CE147 - Signal Matching using Coherence Function Cross Spectral DensityCode Examples12/10/200974KB
CE148 - ADC Sampling with DMA and FIR Filtering - Apps include Circuit BreakersCode Examples08/17/200956KB
CE149 - Signal generation, fractional sampling rate, interpolation, decimationCode Examples08/17/200931KB
CE150 - JPEG Entropy CodingCode Examples08/17/200916KB
CE151 - CRC GenerationCode Examples12/10/200924KB
CE152 - Parallel Master Port (PMP) ExampleCode Examples12/10/200934KB
CE153 - RTCCCode Examples08/17/200912KB
CE154 - ADC to DAC LoopbackCode Examples10/24/201349KB
CE155 - Real-Time Data Monitoring (RTDM) ExampleCode Examples12/10/20091223KB
16-bit CPU Self-test LibrarySoftware Library06/20/2015
dsPIC DSC DTMF Generation/Detection LibrariesSoftware Library08/12/200833KB
dsPIC FSK Generation LibrarySoftware Library12/19/200730KB
Hardware Conditioning of Sensor SignalsWebinars01/27/201057070KB
CE125 - CodeGuard(TM) Security: Secure Segment ErasedsPIC33F code examples09/13/200726KB
CE144 - CodeGuard Application ExampledsPIC33F code examples09/13/2007327KB
dsPIC33FJ128GP804 and PIC24HJ128GP504 PIM Information SheetPin Maps01/15/2013199KB
dsPIC33FJ128GP804 and PIC24HJ128GP504 PIM Information Sheet for Graphics AppsPin Maps10/26/2009511KB
In-Circuit Debugging Interface Options with dsPIC DSCQuick Start Guides09/19/2005110KB
订购型号
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
DSPIC33FJ64GP202-E/MM28QFN-S-40C to +125CTUBE4.844.444.023.703.52
DSPIC33FJ64GP202-E/SO28SOIC-40C to +125CTUBE4.734.333.923.613.43
DSPIC33FJ64GP202-E/SP28SPDIP-40C to +125CTUBE4.924.514.083.763.57
DSPIC33FJ64GP202-I/MM28QFN-S-40C to +85CTUBE4.414.053.663.373.21
DSPIC33FJ64GP202-I/SO28SOIC-40C to +85CTUBE4.303.943.573.283.12
DSPIC33FJ64GP202-I/SP28SPDIP-40C to +85CTUBE4.494.123.733.433.26
DSPIC33FJ64GP202T-E/MM28QFN-S-40C to +125CT/R4.654.544.434.083.88
DSPIC33FJ64GP202T-E/SO28SOIC-40C to +125CT/R4.444.334.233.893.71
DSPIC33FJ64GP202T-I/MM28QFN-S-40C to +85CT/R4.464.093.703.413.24
DSPIC33FJ64GP202T-I/SO28SOIC-40C to +85CT/R4.353.983.613.323.16
相关开发工具
相类似产品
ProductPinsFlashRAMPrice5KNotes
dsPIC33FJ128GP202281288,192$3.44DSP
dsPIC33FJ128GP204441288,192$3.58DSP
dsPIC33FJ128GP8022812816,384$3.72DSP, CAN
dsPIC33FJ128GP8044412816,384$3.96DSP, CAN
dsPIC33FJ32GP20228322,048$2.53DSP
dsPIC33FJ32GP20444322,048$2.66DSP
dsPIC33FJ32GP30228324,096$2.76DSP
dsPIC33FJ32GP30444324,096$3.01DSP
dsPIC33FJ64GP20228648,192$3.12DSP
dsPIC33FJ64GP20444648,192$3.29DSP
dsPIC33FJ64GP802286416,384$3.42DSP, CAN
dsPIC33FJ64GP804446416,384$3.65DSP, CAN
器件无铅环保信息
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
DSPIC33FJ64GP202T-E/SO0.7704001.15250028SOIC.300inMatte Tine3
DSPIC33FJ64GP202T-I/SO0.7704001.15250028SOIC.300inMatte Tine3
DSPIC33FJ64GP202-E/SO0.7704001.37037028SOIC.300inMatte Tine3
DSPIC33FJ64GP202-I/SO0.7704001.37037028SOIC.300inMatte Tine3
DSPIC33FJ64GP202-I/SP2.0875003.73333328SPDIP.300inMatte Tine3
DSPIC33FJ64GP202-E/SP2.0875003.73333328SPDIP.300inMatte Tine3
DSPIC33FJ64GP202T-E/MM0.1016000.41875028QFN-S6x6x0.9mmMatte Tine3
DSPIC33FJ64GP202-I/MM0.1016000.16393428QFN-S6x6x0.9mmMatte Tine3
DSPIC33FJ64GP202T-I/MM0.1016000.41875028QFN-S6x6x0.9mmMatte Tine3
DSPIC33FJ64GP202-E/MM0.1016000.16393428QFN-S6x6x0.9mmMatte Tine3
DSPIC33FJ64GP202T-E/MMVAO0.1016000.41875028QFN-S6x6x0.9mmMatte Tine3
dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04 and dsPIC33FJ128GPX02/X04 Data Sheet dsPIC33FJ64GP804
dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04 and dsPIC33FJ128GPX02/X04 Family Err dsPIC33FJ64GP804
16-bit MCU and DSC Programmer's Reference Manual PIC24FJ32GA002
dsPIC33F/PIC24H Flash Programming Specification dsPIC33FJ32GP204
AN1044 PIC24FJ16GA002
AN1045 dsPIC33FJ64MC804
AN1069 25AA02E64
Using C30 Compiler and the SPI Module to Interface EEPROMs with dsPIC33F 25AA02E64
AN1071 PIC24FJ16GA004
IrDA Standard Stack for Microchip 16-bit Microcontrollers PIC24FJ16GA004
IrDA Standard Stack for Microchip 32-bit Microcontrollers PIC24FJ16GA004
AN1079 24VL025
AN1079 Source Code 24VL025
AN1096 25AA02E64
Using the C30 Compiler to Interface SPI Serial EEPROMs with dsPIC33F Source Code 25AA02E64
AN1100 dsPIC33FJ64MC804
Using the C30 Compiler to Interface Serial EEPROMs with dsPIC33F dsPIC33FJ64MC804
AN1115 dsPIC33FJ12GP202
AN1115 Source Code dsPIC33FJ12GP202
AN1152 dsPIC33FJ12GP202
AN1152 Source Code dsPIC33FJ12GP202
AN1204 PIC24FJ16GA004
AN1210 PIC24FJ32GA002
AN1210 Source Code PIC24FJ32GA002
AN1227 dsPIC33FJ12GP202
AN1229 ENC624J600
PIC18F ClassB-2 Library ENC624J600
AN1236 11AA02E64
AN1236 Source Code 11AA02E64
AN1249 dsPIC33FJ64MC802
AN1249 Source Code dsPIC33FJ64MC802
AN699 MCP3304
16-bit Embedded Control Solutions Brochure PIC24FJ32GA002
Electronic Solutions for Medical and Fitness 24VL025
MPLAB® X IDE Product Overview 24VL025
dsPIC33/PIC24 FRM, I2C PIC24FJ32GA002
dsPIC33/PIC24 FRM, Output Compare PIC24FJ32GA002
dsPIC33/PIC24 FRM, Serial Peripheral Interface (SPI) PIC24FJ32GA002
dsPIC33/PIC24 FRM, UART PIC24FJ32GA002
Section 02. CPU - dsPIC33F FRM dsPIC33FJ32GP204
Section 03. Data Memory - dsPIC33F/PIC24H FRM dsPIC33FJ32GP204
Section 04. Program Memory - dsPIC33F/PIC24H FRM dsPIC33FJ32GP204
Section 05. Flash Programming - dsPIC33F/PIC24H FRM dsPIC33FJ32GP204
Section 08. Reset - dsPIC33F FRM dsPIC33FJ32GP204
Section 09. Watchdog Timer and Power-Saving Modes - dsPIC33F/PIC24H FRM dsPIC33FJ32GP204
Section 10. I/O Ports - dsPIC33F/PIC24H FRM dsPIC33FJ32GP204
Section 11. Timers - dsPIC33F/PIC24H FRM dsPIC33FJ32GP204
Section 12. Input Capture - dsPIC33F FRM dsPIC33FJ32GP204
Section 16. Analog-to-Digital Converter (ADC) - dsPIC33F/PIC24H FRM dsPIC33FJ32GP204
Section 20. Data Converter Interface (DCI) - dsPIC33F FRM dsPIC33FJ64GP804
Section 21. Enhanced Controller Area Network (ECAN) - dsPIC33F/PIC24H FRM dsPIC33FJ64MC804
Section 23. CodeGuard Security - dsPIC33F/PIC24H FRM dsPIC33FJ32GP204
Section 24. Programming and Diagnostics - dsPIC33F/PIC24H FRM dsPIC33FJ32GP204
Section 25. Device Configuration - dsPIC33F/PIC24H FRM dsPIC33FJ32GP204
Section 26. Development Tool Support - dsPIC33F FRM dsPIC33FJ32GP204
Section 30. I/O Ports with Peripheral Pin Select (PPS) - dsPIC33F/PIC24H FRM dsPIC33FJ32GP204
Section 31. Introduction (Part III) - dsPIC33F FRM dsPIC33FJ64MC804
Section 32. Interrupts (Part III) - dsPIC33F/PIC24H FRM dsPIC33FJ64MC804
Section 33. Audio Digital-to-Analog Converter (DAC) - dsPIC33F FRM dsPIC33FJ64MC804
Section 34. Comparator - dsPIC33F FRM dsPIC33FJ64MC804
Section 35. Parallel Master Port (PMP) - dsPIC33F/PIC24H FRM dsPIC33FJ64MC804
Section 36. Programmable Cyclic Redundancy Check (CRC) - dsPIC33F FRM dsPIC33FJ64MC804
Section 37. Real-Time Clock and Calendar (RTCC) - dsPIC33F/PIC24H FRM dsPIC33FJ64MC804
Section 38. Direct Memory Access (DMA) (Part III) - dsPIC33F/PIC24H FRM dsPIC33FJ64MC804
Section 39. Oscillator (Part III) - dsPIC33F FRM dsPIC33FJ64MC804
Program Executive RIPE_01b_000033 PIC24FJ32GA002
CE100 - Using A/D Converters and DSP Library for Signal Filtering dsPIC33FJ32GP204
CE101 - Configuring 10-bit A/D Converters for 1MSPS Conversion Rate dsPIC33FJ32GP204
CE102 - Performing A/D Conversions in SLEEP (Low-Power) Mode dsPIC33FJ32GP204
CE103 - Implementing DOZE Mode for Dynamic CPU Power Control dsPIC33FJ32GP204
CE104 - Dynamic Clock Switching for Low Power Operation dsPIC33FJ32GP204
CE105 - Address Error Traps for Easy Debugging dsPIC33FJ32GP204
CE106 - Math Error Traps for Robust Operation dsPIC33FJ32GP204
CE107 - Stack Error Traps for Easy Debugging dsPIC33FJ32GP204
CE108 - Oscillator Failure Traps and Failsafe Clock Monitoring dsPIC33FJ32GP204
CE109 - Run-Time Self Programming of FLASH Program Memory dsPIC33FJ32GP204
CE110 - Dynamic Tuning of Internal Fast RC dsPIC33FJ32GP204
CE111 - External Interrupt Pins Configuration and Use dsPIC33FJ32GP204
CE112 - Fast Wake-up From Sleep Mode dsPIC33FJ32GP204
CE113 - Timer1 used in Real-Time Clock Applications dsPIC33FJ32GP204
CE114 - Using the DMA with the UART in Loopback mode dsPIC33FJ32GP204
CE115 - Example of Handling a DMA Trap dsPIC33FJ32GP204
CE116 - Using the DMA with the SPI module dsPIC33FJ32GP204
CE117 - Using the DMA with DCI peripheral for I2S driver dsPIC33FJ32GP204
CE118 - Using FIR Filters From dsPIC Filter Design and DSP Library dsPIC33FJ32GP204
CE119 Interfacing to I2C Serial EEPROM using I2C peripheral dsPIC33FJ32GP204
CE120 A/D Conversions with Scanning through selected Analog Inputs with DMA dsPIC33FJ32GP204
CE121 A/D Conversions with Scanning through selected Analog Inputs without DMA dsPIC33FJ32GP204
CE122 - ADC Alternate Sampling dsPIC33FJ32GP204
CE123 - CodeGuard(TM) Security: segment creation and code placement dsPIC33FJ32GP204
CE124 - CodeGuard(TM) Security: Program flow changes between segments dsPIC33FJ32GP204
CE127 - Crosswire Communication between ECAN 1 and ECAN 2 modules dsPIC33FJ32GP204
CE128 - ECAN FIFO Receive Example dsPIC33FJ32GP204
CE129 - ECAN Remote Transmission Request dsPIC33FJ32GP204
CE132 - Si3000 Driver dsPIC33FJ32GP204
CE135 - SPI Demo dsPIC33FJ32GP204
CE136 - SPI without DMA dsPIC33FJ32GP204
CE137 - UART without DMA dsPIC33FJ32GP204
CE138 - SPI with two slaves dsPIC33FJ32GP204
CE139 - 10-bit ADC Sampling at 2.2MSPS dsPIC33FJ32GP204
CE140 - Inverse tangent operation using CORDIC iterative approximation dsPIC33FJ32GP204
CE141 - SPI with Framed mode dsPIC33FJ32GP204
CE142 - Open Drain configuration dsPIC33FJ32GP204
CE143 - Using Timer1 for Period Interrupts dsPIC33FJ32GP204
CE145 - Using I2C module as a Slave device dsPIC33FJ32GP204
CE146 - Adaptive Notch Filter dsPIC33FJ32GP204
CE147 - Signal Matching using Coherence Function Cross Spectral Density dsPIC33FJ32GP204
CE148 - ADC Sampling with DMA and FIR Filtering - Apps include Circuit Breakers dsPIC33FJ32GP204
CE149 - Signal generation, fractional sampling rate, interpolation, decimation dsPIC33FJ32GP204
CE150 - JPEG Entropy Coding dsPIC33FJ32GP204
CE151 - CRC Generation dsPIC33FJ32GP204
CE152 - Parallel Master Port (PMP) Example dsPIC33FJ32GP204
CE153 - RTCC dsPIC33FJ32GP204
CE154 - ADC to DAC Loopback dsPIC33FJ32GP204
CE155 - Real-Time Data Monitoring (RTDM) Example dsPIC33FJ32GP204
Download Recorded Presentation File (slides + audio): dsPIC33FJ32GP204
Download Presentation File(slides + text) in .pdf format: dsPIC33FJ32GP204
CE125 - CodeGuard(TM) Security: Secure Segment Erase dsPIC33FJ32GP204
CE144 - CodeGuard Application Example dsPIC33FJ32GP204
dsPIC33FJ128GP804 and PIC24HJ128GP504 PIM Information Sheet dsPIC33FJ64GP804
dsPIC33FJ128GP804 and PIC24HJ128GP504 PIM Information Sheet for Graphics Apps dsPIC33FJ64MC804
In-Circuit Debugging Interface Options with dsPIC DSC PIC24FJ32GA002