SPC56XVTOP-M:RAM/Debug Top Board for SPC56 M line VertiCal Base boards
Calibration is a process of optimizing a control algorithm to get the desired response from
the system. A calibration tool is a combination of a hardware interface and a software
application that enables the engineer to access the "calibration variables" in an ECU and
change them.
The SPC56xVTOP-M Vertical Calibration Top board is designed to work with the SPC563MxxAVBx
Vertical base board for SPC563x line and moreover the board enables the use of new enhanced
automotive calibration and debug tools on the SPC563Mx line of automotive microcontrollers,
featuring a 16-bit bus interface.
Key Features
- 1 MByte high-speed static RAM organized as 1024K words by 16 bits;
- 16-bit multiplexed Calibration bus configuration;
- Support for Nexus-based debug tools even if application PCB does not include Nexus connector;
- Nexus functionality with 16 Message Data Out (MDO) signals;
- High speed CAN transceiver with signals protection;
- ST A5973D step down monolithic power switching regulator.
产品规格
Hardware Development Tools
型号 | 制造商 | Description |
---|
SPC563M64AVB144 | ST | VertiCal base board for SPC563M series devices in QFP144 package |
SPC563M64AVB176 | ST | VertiCal base board for SPC563M (Monaco) series devices in QFP176 |
样片和购买
型号 | General Description | Specific features | RoHS Compliance Grade | Unit Price (US$)
* | Material Declaration | Quantity |
---|
SPC56XVTOP-M | RAM/Debug Top Board for SPC56 M line VertiCal Base boards | - | Ecopack1 | 658.58 | - | 1 |
质量和可靠性
型号 | Package | Grade | RoHS Compliance Grade | Material Declaration** |
---|
SPC56XVTOP-M | CONTRACTS | Industrial | Ecopack1 | |