• 简体中文
• English

M41T60：Low power serial real-time clock (RTC)

The M41T60 is a low-power serial real-time clock (RTC) with a built-in 32.768 kHz oscillator (external crystal controlled). Eight registers are used for the clock/calendar function and are configured in binary-coded decimal (BCD) format. Addresses and data are transferred serially via a two-line, bidirectional bus. The built-in address register is increased automatically after each WRITE or READ data byte.

The eight clock address locations contain the century, year, month, date, day, hour, minute, and second in 24-hour BCD format. Corrections for 28-, 29- (leap year), 30-, and 31-day months are made automatically.

The M41T60 is supplied in a 16-lead QFN package.

Key Features

• Counters for seconds, minutes, hours, day, date, month, years, and century
• 32 KHz crystal oscillator integrating load capacitance and high crystal series resistance operation
• Oscillator stop detection monitors clock operation
• Serial interface supports I2 C bus (400 kHz)
• 350 nA timekeeping current at 3 V
• Low operating current of 35 μA (at 400 kHz)
• Timekeeping down to 1.0 V
• 1.3 V to 4.4 V I2 C bus operating voltage
• Software clock calibration to compensate deviation of crystal due to temperature
• Software programmable output (OUT)
• Operating temperature of –40 to 85 °C
• Automatic leap year compensation
• Lead-free 16-pin QFN package
• Li-ion rechargeable operation

产品规格

应用手册

手册

Clocks and Timers Software

样片和购买

质量和可靠性