• 简体中文
• English

RHFLVDS31A：Rad-Hard quad LVDS driver

The RHFLVDS31A is a quad, low-voltage, differential signaling (LVDS) driver specifically designed, packaged, and qualified for use in aerospace environments in a low-power and fast point-to-point baseband data transmission standard.

Operating at 3.3 V power supply, the RHFLVDS31A operates over a controlled impedance of 100-ohm transmission media that may be printed circuit board traces, back planes or cables.

The circuit features an internal fail-safe function to ensure a known state in case of floating input. All pins have cold spare buffers to ensure they are in high impedance when VCC is tied to GND.

Designed on ST's proprietary CMOS process with specific mitigation techniques, the RHFLVDS31A achieves “best in the class” for hardness to total ionisation dose and heavy ions.

The RHFLVDS31A can operate over a large temperature range of -55 °C to +125 °C and it is housed in an hermetic Ceramic Flat-16 package.

Key Features

• LVDS output
• CMOS input
• Enable/Disable function with high-impedance
• ANSI TIA/EIA-644 compliant
• 400 Mbps (200 MHz)
• Cold spare on all pins
• 3.3 V operating power supply
• 4.8 V absolute rating
• Output voltage: 350 mV on 100-ohm load
• Power consumption: 55 mW at 3.3 V
• Hermetic package
• Guaranteed up to 300 krad TID
• SEL immune up to 135 MeV.cm²/mg
• SET/SEU immune up to 67 MeV.cm²/mg

产品规格

应用手册

Technical Notes & Articles

HW Model & CAD Libraries

选型指南

样片和购买

质量和可靠性