• 简体中文
• English

SEA05L：Advanced constant voltage and constant current controller with very efficient LED pilot-lamp driver

The device is a highly integrated solution for SMPS applications, with an LED pilot-lamp requiring a dual control loop to perform CV (constant voltage) and CC (constant current) regulation.

The IC allows very efficient LED pilot-lamp driving which helps to reduce the standby consumption of the SMPS. It integrates a voltage reference, two op-amps (with OR-ed open-drain outputs), a low-side current sensing circuit and an LED pilot-lamp driver pin implemented with an open-drain mosfet driven by square waveform with 12.5% duty cycle at 1 kHz that allows reducing LED consumption.

The voltage reference, along with one op-amp, is the core of the voltage control loop. The current sensing circuit and the other op-amp make up the current control loop.

The external components needed to complete the two control loops are:

- a resistor divider that senses the output of the power supply and fixes the voltage regulation setpoint at the specified value

- a sense resistor that feeds the current sensing circuit with a voltage proportional to the DC output current; this resistor determines the current regulation setpoint and must be adequately rated in terms of power dissipation

- the frequency compensation components (R-C networks) for both loops.

The device is ideal for space-critical applications.

Key Features

• Constant voltage and constant current control
• Very efficient LED pilot-lamp driver
• Wide operating VCC range (3.5 V - 36 V)
• Low quiescent consumption: 250 μA
• Voltage reference: 2.5 V
• Voltage control loop accuracy ± 0.5%
• Current sense threshold: 50 mV
• Current control loop accuracy ± 4%
• Low external component count
• Open-drain output stage
• SOT23-6L package

产品规格

Technical Notes & Articles

手册

样片和购买

质量和可靠性