ST10F276E:16-bit MCU with MAC unit, 832 Kbyte Flash memory and 68 Kbute RAM

The architecture of the ST10F276E combines advantages of both RISC and CISC processors and an advanced peripheral subsystem. The block diagram gives an overview of the different on-chip components and the high bandwidth internal bus structure of the ST10F276E.

Key Features

  • Highly performance 16-bit CPU with DSP functions
    • 31.25ns instruction cycle time at 64MHz max CPU clock
    • Multiply/accumulate unit (MAC) 16 x 16-bit multiplication, 40-bit accumulator
    • Enhanced boolean bit manipulations
    • Single-cycle context switching support
  • On-chip memories
    • 512 Kbyte Flash memory (32-bit fetch)
    • 320 Kbyte extension Flash memory (16-bit fetch)
    • Single voltage Flash memories with erase/program controller and 100K erasing/programming cycles
    • Up to 16 Mbyte linear address space for code and data (5 Mbytes with CAN or I2C)
    • 2 Kbyte internal RAM (IRAM)
    • 66 Kbyte extension RAM (XRAM)
  • External bus
    • Programmable external bus configuration & characteristics for different address ranges
    • 5 programmable chip-select signals
    • Hold-acknowledge bus arbitration support
  • Interrupt
    • 8-channel peripheral event controller for single cycle interrupt driven data transfer
    • 16-priority-level interrupt system with 56 sources, sampling rate down to 15.6ns
  • Timers
    • 2 multi-functional general purpose timer units with 5 timers
  • Two 16-channel capture / compare units
  • 4-channel PWM unit + 4-channel XPWM
  • A/D converter
    • 24-channel 10-bit
    • 3 μs minimum conversion time
  • Serial channels
    • 2 synch. / asynch. serial channels
    • 2 high-speed synchronous channels
    • 1 I2C standard interface
  • 2 CAN 2.0B interfaces operating on 1 or 2 CAN busses (64 or 2x32 message, C-CAN version)
  • Fail-safe protection
    • Programmable watchdog timer
    • Oscillator watchdog
  • On-chip bootstrap loader
  • Clock generation
    • On-chip PLL with 4 to 12 MHz oscillator
    • Direct or prescaled clock input
  • Real-time clock and 32 kHz on-chip oscillator
  • Up to 111 general purpose I/O lines
    • Individually programmable as input, output or special function
    • Programmable threshold (hysteresis)
  • Idle, power down and stand-by modes
  • Single voltage supply: 5V ±10% (embedded regulator for 1.8 V core supply)
产品规格
DescriptionVersionSize
DS4722: 16-bit MCU with MAC unit, 832 Kbyte Flash memory and 68 Kbyte RAM4.02 MB
应用手册
DescriptionVersionSize
AN2353: Designing an application with the ST10F27x devices2.0163 KB
AN2244: EEPROM emulation with ST10F27x embedded Flash using the ST10F27x Flash library2.0171 KB
AN2352: PLL jitter effects on C-CAN modules of the ST10F27x2.0171 KB
AN2341: Programming ST10F27x/F25x CAN interrupt drivers2.0159 KB
AN2143: Programming the ST10F27x embedded Flash using the ST10FLASHER tool2.0360 KB
AN2340: ST10 RPD pin: functionality during Reset and Power Down mode2.0104 KB
AN2354: ST10 UART recommendations2.0248 KB
AN2142: ST10F27X firmware development getting started with tasking ST10 toolchain2.0687 KB
AN2165: ST10F27x firmware development getting started with Keil µVision ST10 toolchain2.0624 KB
AN2168: ST10F27x hardware development getting started3.0184 KB
AN2388: Sensor field oriented control (IFOC) of three-phase AC induction motors using ST10F2761.41 MB
用户手册
DescriptionVersionSize
UM0404: High performance ST10F276Z5 and ST10F276E 16-bit microcontrollers2.113 MB
UM0289: eMotion: a motion control kit based on ST10F2761.41 MB
编程手册
DescriptionVersionSize
PM0036: ST10 Family programming manual8.16 MB
勘误手册
DescriptionVersionSize
ES032: 16-bit MCUs with 512/768/832 KByte Flash and 36/36/68 KByte RAM memories10.0195 KB
样片和购买
型号QuantityUnit Price (US$) *PackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)ECCN (EU)ECCN (US)Country of Origin
ST10F276-6Q3--PQFP 144 28x28x3.4Tray-40125NEC3A991A2-
ST10F276-6QR3--PQFP 144 28x28x3.4Tape And Reel-40125NEC3A991A2-
ST10F276-4T3--LQFP 144 20x20x1.4Tray-40125NEC3A991A2MALTA
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
ST10F276-6Q3PQFP 144 28x28x3.4AutomotiveEcopack1
ST10F276-6QR3PQFP 144 28x28x3.4AutomotiveEcopack1new_ipc-wspc-1752a_b65l-f276cfr_signed.pdf
ST10F276-4T3LQFP 144 20x20x1.4AutomotiveEcopack2ipc-wspc-1752a_a51a-f276cf2.pdf
ipc-wspc-1752a_a51a-f276cf2.xml
16-bit MCU with MAC unit, 832 Kbyte Flash memory and 68 Kbyte RAM ST10F276E
circuit_diagram_12303_thumbnail.png ST10F276E
Designing an application with the ST10F27x devices ST10F272E
EEPROM emulation with ST10F27x embedded Flash using the ST10F27x Flash library ST10F272E
PLL jitter effects on C-CAN modules of the ST10F27x ST10F272E
Programming ST10F27x/F25x CAN interrupt drivers ST10F272E
Programming the ST10F27x embedded Flash using the ST10FLASHER tool ST10F272E
ST10 RPD pin: functionality during Reset and Power Down mode ST10F272E
ST10 UART recommendations ST10F272B
ST10F27X firmware development getting started with tasking ST10 toolchain ST10F272E
ST10F27x firmware development getting started with Keil µVision ST10 toolchain ST10F272E
ST10F27x hardware development getting started ST10F272E
Sensor field oriented control (IFOC) of three-phase AC induction motors using ST10F276 ST10F276Z5
High performance ST10F276Z5 and ST10F276E 16-bit microcontrollers ST10F276Z5
eMotion: a motion control kit based on ST10F276 ST10F276Z5
ST10 Family programming manual ST10F272E
16-bit MCUs with 512/768/832 KByte Flash and 36/36/68 KByte RAM memories ST10F276E
new_ipc-wspc-1752a_b65l-f276cfr_signed.pdf ST10F276E
ipc-wspc-1752a_a51a-f276cf2.pdf ST10F276E
ipc-wspc-1752a_a51a-f276cf2.xml ST10F276E