• 简体中文
• English

ST3485EI：3.3 V powered, 15 kV ESD protected, up to 12 Mbps RS-485/RS-422 transceiver, [-40oC, 125oC] temperature range

The ST3485EB/EC/EI/EIY device is ±15 kV ESD protected, 3.3 V low power transceiver for RS-485 and RS-422 communications. The device contains one driver and one receiver in half duplex configuration.

The ST3485E device transmits and receives at a guaranteed data rate of at least 12 Mbps.

All transmitter outputs and receiver inputs are protected to ±15 kV IEC 61000-4-2 air discharge.

The driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high impedance state.

Key Features

• ESD protection
  • ±15 kV IEC 61000-4-2 air discharge
  • ±8 kV IEC 61000-4-2 contact discharge
• Operate from a single 3.3 V supply - no charge pump required
• Interoperable with 5 V logic
• 1 µA low current shutdown mode max.
• Guaranteed 12 Mbps data rate
• -7 to 12 V common mode input voltage range
• Half duplex versions available
• Industry standard 75176 pinout
• Current limiting and thermal shutdown for driver overload protection
• Guaranteed high receiver output state for floating inputs with no signal present
• Allow up to 64 transceivers on the bus
• Available in SO8 package
• Automotive grade (ST3485EIY)

产品规格

应用手册

手册

样片和购买

质量和可靠性