STEVAL-IFP016V2:IO-Link communication master transceiver demonstration board based on the L6360

The STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board is based on the L6360, monolithic IO-Link master port. A modular and customizable application that interfaces externally with the microcontroller. The purpose of the board is to demonstrate the capability of the L6360 monolithic IO-Link master, as communication transceiver for multiple I/Os.

The board uses input signal from the microcontroller and outputs the 24 V required for industrial applications.

The board demonstrates that the L6360 is both IO-Link master port mode and standard IO mode compliant.

The interface is compatible with the STEVAL-PCC009V2 and STEVAL-PCC009V1 EMC-immune application against ESD, burst, surge, RF noise, etc., according to IEC61000-4-2, IEC61000-4-4, IEC61000-4-5, and IEC61000-4-6 standards.

A large GND area on the printed circuit board has been designed in order to minimize noise and ensure good thermal performance.

The small size of the L6360 package with a reduced pin number, along with the small size of the application area, allow the user to work in applications where space constraint is critical. The L6360 is a monolithic IO-Link master port, compliant with PHY2 (3 wires) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The output stage (high-side, low-side or push-pull) as well as the cutoff current, cutoff current delay time, and restart delay, are programmable by I2C protocol.

The cutoff current and cutoff current delay time, combined with the thermal shutdown and automatic restart, protect the device against overload and short-circuit. The output stages are able to drive resistive, inductive and capacitive loads. Fast demagnetization is able to dissipate the energy stored in the inductive loads.

Key Features

  • Supply voltage from 18 V to 32.5 V
  • Fully protected programmable output stages
  • Supports COM1, COM2 and COM3 mode
  • 5 mA IO-Link digital input
  • Additional IEC61131-2 type-1 input
  • 3.3 V / 5 V, 50 mA linear regulator
  • Fast mode I2 C for IC control, configuration and diagnostic
  • Diagnostic dual LED sequence generator and driver
  • 5 V and 3.3 V compatible I/Os
  • Interface compatible with STEVAL-PCC009V2 and STEVAL-PCC009V1
  • EMC immune application against ESD, burst, surge, RF noise, etc., according to IEC61000-4-2, IEC61000-4-4, IEC61000-4-5, and IEC61000-4-6 standards
  • RoHS compliant
产品规格
DescriptionVersionSize
DB1620: IO-Link communication master transceiver demonstration board based on the L6360, monolithic IO-Link master port2.0409 KB
应用手册
DescriptionVersionSize
AN4075: STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board1.0409 KB
Board Manufacturing Specifications
DescriptionVersionSize
STEVAL-IFP016V2 gerber files1.0536 KB
Bill of Materials
DescriptionVersionSize
STEVAL-IFP016V2 BOM1.018 KB
Schematic Packs
DescriptionVersionSize
STEVAL-IFP016V2 schematics1.0171 KB
手册
DescriptionVersionSize
Products and Solutions for Factory Automation and Control1.03 MB
许可协议
DescriptionVersionSize
Evaluation products license agreement1.0125 KB
Evaluation Tool Software
型号制造商Description
STSW-IFP001IPS Evaluation Tool
STSW-IFP016V2STSW-IFP016V2 application software setup
样片和购买
型号Core ProductUnit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
STEVAL-IFP016V2L636071.051NECEAR99ITALY
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
STEVAL-IFP016V2CARDIndustrialEcopack2
IO-Link communication master transceiver demonstration board based on the L6360, monolithic IO-Link master port STEVAL-IFP016V2
STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board STEVAL-IFP016V2
STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board STEVAL-IFP016V2
STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board STEVAL-IFP016V2
STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board STEVAL-IFP016V2
STEVAL-SPIMD20V1 demonstration kit based on the SPIMD20 integrated motor drive STEVAL-SPIMD20V1
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 ST-LINK-V2