STEVAL-ILD005V1:Trailing edge phase control rotary wall dimmer based on STF17N62K3 power MOSFET

The STEVAL-ILD005V1 evaluation board implements a simple and cost-effective MOS-based reverse phase cut dimming solution for analog wall dimmers using a pair of STF17N62K3 power MOSFETs controlled by a triple 3-input NOR gate to effectively dim either resistive or capacitive lighting loads (i.e. halogen lamps, electronic low voltage transformers and various dimmable CFL/LED lamps). The AC analog control dimming technique employed allows for both on/off power switching and up/down dimming functions through a single linear rotary potentiometer equipped with a mechanical switch which opens the circuit at minimum setting. Control of the board is achieved using a triple 3-input NOR gate (pin-to-pin compatible with a ST's HCF4025BE 14-lead dual in-line CMOS gate logic device in plastic SO-14 micropackage) which acts as a gate driving voltage signal source, performs zero crossing detection and timing through the use of a few other passive components and diodes.

Key Features

  • Operation for 2-wire wall dimmer
  • Trailing-edge control only (compatible with all lamps commonly found on the market)
  • Operation on 110 V or 230 V rms line voltage (±10%) and 50 Hz or 60 Hz line frequency;
  • Dimmable power range (without heatsinks mounted on MOSFETs)
    • 40 W to 300 W for 230 V rms line
    • 15 W to 90 W for 110 V rms line
  • Maximum operating ambient temperature: 50 °C
  • Power efficiency @ Max power - 230 V > 95%
  • Power factor @ Max power > 0.98
  • Control and regulation interface with a switched type single linear rotary potentiometer
  • Compliance with EMC standards:
    • IEC 61000-4-5: criteria A for 2 kV surge
    • Compliant with EN55015 with 300 W - 230 V halogen lamp
  • Flicker-free dimming performance
  • Smooth dimming operation and silent dimming control with no buzzing or audible noise
  • Acceptable levels of EMI noise without the need for LC filters to reduce conducted emission disturbances
  • Low inrush current generation
  • RoHS compliant
产品规格
DescriptionVersionSize
DB2518: Trailing edge phase control rotary wall dimmer based on the STF17N62K3 power MOSFET3.0209 KB
应用手册
DescriptionVersionSize
AN4717: STEVAL-ILD005V1: Trailing edge phase control rotary wall dimmer based on STF17N62K3 power MOSFET1.02 MB
Board Manufacturing Specifications
DescriptionVersionSize
STEVAL-ILD005V1 gerber files2.0333 KB
Bill of Materials
DescriptionVersionSize
STEVAL-ILD005V1 BOM1.078 KB
Schematic Packs
DescriptionVersionSize
STEVAL-ILD005V1 schematic1.052 KB
许可协议
DescriptionVersionSize
Evaluation products license agreement1.0125 KB
样片和购买
型号Core ProductUnit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
STEVAL-ILD005V1STF17N62K375.951NECEAR99ITALY
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
STEVAL-ILD005V1CARDIndustrialEcopack2
Trailing edge phase control rotary wall dimmer based on the STF17N62K3 power MOSFET STEVAL-ILD005V1
STEVAL-ILD005V1: Trailing edge phase control rotary wall dimmer based on STF17N62K3 power MOSFET STEVAL-ILD005V1
STEVAL-ILD005V1: Trailing edge phase control rotary wall dimmer based on STF17N62K3 power MOSFET STEVAL-ILD005V1
STEVAL-ILD005V1: Trailing edge phase control rotary wall dimmer based on STF17N62K3 power MOSFET STEVAL-ILD005V1
STEVAL-ILD005V1: Trailing edge phase control rotary wall dimmer based on STF17N62K3 power MOSFET STEVAL-ILD005V1
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 ST-LINK-V2