STEVAL-ISA042V2:1.5 A / 3.3 V step-down DC-DC converter demonstration board based on the ST1S03

The STEVAL-ISA042V2 demonstration board is a step-down DC-DC converter optimized for powering the low-voltage digital core in HDD applications and, more generally, replacing the high-current linear solution when the power dissipation may cause excessive heating of the application environment. It provides up to 1.5 A over an input voltage range of 3 V to 16 V.

A high switching frequency (1.5 MHz) allows the use of tiny surface-mounted components, as well as the use of a resistor divider to set the output voltage value. Only an inductor, a Schottky diode, and two capacitors are required. In addition, a low output ripple is guaranteed by the current-mode PWM topology and by the use of low ESR SMD ceramic capacitors. The device is thermal protected and current limited to prevent damage due to accidental short-circuits.

It uses the ST1S03 device.

The ST1S03 is available in a DFN6 (3x3mm) package.

Key Features

  • Adjustable current-mode PWM step-down DC-DC converter
  • Output voltage, Vout : 3.3 V
  • Output current, Iout : 1.5 A
  • Internal compensation to eliminate additional components
  • Pulse skipping for Iout lower than 15 mA, to maintain the regulation with light loads
  • RoHS compliant
产品规格
DescriptionVersionSize
DB1132: 1.5 A / 3.3 V step-down DC-DC converter demonstration board based on the ST1S031.189 KB
简报
DescriptionVersionSize
Evaluation board presentation1.1431 KB
Board Manufacturing Specifications
DescriptionVersionSize
PCB layout1.031 KB
Bill of Materials
DescriptionVersionSize
Bill of materials1.045 KB
Schematic Packs
DescriptionVersionSize
Board schematic1.039 KB
许可协议
DescriptionVersionSize
Evaluation products license agreement1.0125 KB
样片和购买
型号Core ProductUnit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
STEVAL-ISA042V2ST1S03PUR30.631NECEAR99ITALY
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
STEVAL-ISA042V2CARDIndustrialEcopack2
1.5 A / 3.3 V step-down DC-DC converter demonstration board based on the ST1S03 STEVAL-ISA042V2
1.5 A / 3.3 V step-down DC-DC converter demonstration board based on the ST1S03 STEVAL-ISA042V2
1.5 A / 3.3 V step-down DC-DC converter demonstration board based on the ST1S03 STEVAL-ISA042V2
1.5 A / 3.3 V step-down DC-DC converter demonstration board based on the ST1S03 STEVAL-ISA042V2
1.5 A / 3.3 V step-down DC-DC converter demonstration board based on the ST1S03 STEVAL-ISA042V2
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 ST-LINK-V2