• 简体中文
• English

STM8S005K6：Mainstream Value line 8-bit MCU with 32 Kbytes Flash, 16 MHz CPU, integrated EEPROM

The STM8S005C6/K6 value line 8-bit microcontrollers offer 32 Kbytes Flash program memory, plus 128 bytes of data EEPROM. They are referred to as medium-density devices in the STM8S microcontroller family reference manual (RM0016).

All devices of STM8S005C6/K6 value line provide the following benefits: performance, robustness, reduced system cost and short development cycles.

Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system.

The system cost is reduced thanks to a high system integration level with internal clock oscillators, watchdog, and brown-out reset.

The common family product architecture with compatible pinout, memory map and modular peripherals allow application scalability and reduced development cycles.

All products operate from a 2.95 V to 5.5 V supply voltage.

Full documentation is offered as well as a wide choice of development tools.

Key Features

• Core
  • Max fCPU : 16 MHz
  • Advanced STM8 core with Harvard architecture and 3-stage pipeline
  • Extended instruction set
• Memories
  • Medium-density Flash/EEPROM
    • Program memory: 32 Kbytes of Flash memory; data retention 20 years at 55 °C after 100 cycles
    • Data memory: 128 bytes true data EEPROM; endurance up to 100 k write/erase cycles
  • RAM: 2 Kbytes
• Clock, reset and supply management
  • Low-power modes (wait, active-halt, halt)
  • Switch-off peripheral clocks individually
  • Permanently active, low-consumption power-on and power-down reset
  • Power management
    • Low-power modes (wait, active-halt, halt)
    • Switch-off peripheral clocks individually
    • Permanently active, low-consumption power-on and power-down reset
    • Internal low-power 128 kHz RC
• Interrupt management
  • Nested interrupt controller with 32 interrupts
  • Up to 37 external interrupts on 6 vectors
• Timers
  • 2x 16-bit general purpose timers, with 2+3 CAPCOM channels (IC, OC or PWM)
  • Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization
  • 8-bit basic timer with 8-bit prescaler
  • Auto wakeup timer
  • Window and independent watchdog timers
• Communications interfaces
  • UART with clock output for synchronous operation, SmartCard, IrDA, LIN
  • SPI interface up to 8 Mbit/s
  • I2 C interface up to 400 Kbit/s
• Analog to digital converter (ADC)
  • 10-bit ADC, ± 1 LSB ADC with up to 10 multiplexed channels, scan mode and analog watchdog
• I/Os
  • Up to 38 I/Os on a 48-pin package including 16 high-sink outputs
  • Highly robust I/O design, immune against current injection
• Development support
  • Embedded single-wire interface module (SWIM) for fast on-chip programming and non-intrusive debugging

产品规格

应用手册

Technical Notes & Articles

用户手册

参考手册

编程手册

勘误手册

Design Notes & Tips

HW Model & CAD Libraries

简报

宣传册

手册

Product Certifications

Hardware Development Tools

Software Development Tools

MCUs Embedded Software

Product Evaluation Tools

样片和购买

质量和可靠性