STPM34：ASSP for metering applications with up to four independent 24-bit 2nd order sigma-delta ADCs, 4 MHz OSF and 2 embedded PGLNA
The STPM3x is an ASSP family designed for high accuracy measurement of power and energies in power line systems using the Rogowski coil, current transformer or shunt current sensors. The STPM3x provides instantaneous voltage and current waveforms and calculates RMS values of voltage and currents, active, reactive and apparent power and energies. The STPM3x is a mixed signal IC family consisting of an analog and a digital section. The analog section consists of up to two programmable gain low-noise low-offset amplifiers and up to four 2nd order 24-bit sigma-delta ADCs, two bandgap voltage references with independent temperature compensation, a low drop voltage regulator and DC buffers. The digital section consists of digital filtering stage, a hardwired DSP, DFE to the input and a serial communication interface (UART or SPI). The STPM3x is fully configurable and allows a fast digital system calibration in a single point over the entire current dynamic range.
Key Features
- Active power accuracy:
- <0.1% error over 5000: 1 dynamic range
- <0.5% error over 10000: 1 dynamic range
- Exceeds 50-60 Hz EN 50470-x, IEC 62053-2x, ANSI12.2x standard requirements for AC watt meters
- Reactive power accuracy:
- <0.1% error over 2000:1 dynamic range
- Dual mode apparent energy calculation
- Instantaneous and averaged power
- RMS and instantaneous voltage and current
- Under and overvoltage detection (sag and swell) and monitoring
- Overcurrent detection and monitoring
- UART and SPI serial interface with programmable CRC polynomial verification
- Programmable LED and interrupt outputs
- Four independent 24-bit 2nd
order sigma-delta ADCs
- Two programmable gain chopper stabilized low-noise and low-offset amplifiers
- Bandwidth 3.6 kHz @ -3 dB
- Vcc
supply range 3.3 V ±10%
- Supply current Icc
4 mA (STPM32)
- Input clock frequency 16 MHz, Xtal or external source
- Twin precision voltage reference: 1.18 V with independent programmable TC, 10 ppm/°C typ.
- Internal low drop regulator @ 3 V (typ.)
- QFN packages
- Operating temperature from -40 °C to +85 °C
产品规格
应用手册
用户手册
Design Notes & Tips
简报
宣传册
Evaluation Tool Software
| 型号 | 制造商 | Description |
|---|
| STSW-STPM001 | ST | STPM32/33/34 evaluation software |
| STSW-STPM002 | ST | STM32 firmware for STPM32 access and a basic metrology application |
解决方案评估工具
| 型号 | 制造商 | Description |
|---|
| EVALSTPM34 | | Dual-phase energy metering evaluation board with 2 current transformers based on the STPM34 |
| EVALSTPM3X-3PH | | Poly-phase energy metering demonstration board with current transformers based on the STPM33, STPM34 and STM8S903 |
| STEVAL-IPE023V1 | | USB interface tool for STPMxx family of energy meter ICs |
样片和购买
| 型号 | Package | Packing Type | Operating Temperature (°C) (min) | Operating Temperature (°C) (max) | Autoshutdown | Unit Price (US$)
* | Quantity | ECCN (EU) | ECCN (US) | Country of Origin |
|---|
| STPM34TR | VFQFPN 32 5x5x1.0 | Tape And Reel | -40 | 85 | - | 0.94 | 1000 | NEC | EAR99 | PHILIPPINES |
质量和可靠性
