• 简体中文
• English

STSR2PM：FORWARD SYNCHRONOUS RECTIFIERS SMART DRIVERS

STSR2P Smart Driver IC provides two complementary high current outputs to drive Power Mosfets. The IC is dedicated to properly drive secondary Synchronous Rectifiers in medium power, low output voltage, high efficiency Forward Converters. From a synchronizing clock input, STSR2P generates two driving signals with the self-setting of dead time between complementary pulses. The IC operation prevents secondary side shoot-through conditions providing proper timing at the outputs turn-off transition. This smart function operates through a fast cycle-after-cycle control logic mechanism based on an internal high frequency oscillator, synchronized by the clock signal. A fixed anticipation in turning-off the OUT_GATE1 with respect to the clock signal transition is provided, while the anticipation in turning off the OUT_GATE2 can be set through external components. The adopted transitions revelation mechanism makes circuit operation independent by the forward magnetic reset technique used, avoiding most of the common problems inherent in self-driven synchronous rectifiers. A special Inhibit function allows the shut-off of OUT_GATE2. This feature makes discontinuous conduction mode possible and prevents the freewheeling mosfet from sinking current from the output.

STSR2P automatically turns off the outputs when duty-cycle is lower than 13%, while STSR2PM works even at very low duty-cycle values.

Key Features

• POSSIBILITY TO OPERATE IN DISCONTINUOUS MODE
• SUPPLY VOLTAGE RANGE: 4.5V TO 5.5V
• OPERATING FREQUENCY: 20 TO 750 KHZ
• TYPICAL PEAK OUTPUT CURRENT: SOURCE -2A, SINK 3.5A
• OPERATION INDEPENDENT FROM THE FORWARD MAGNETIC RESET TECHNIQUE
• SMART TURN-OFF ANTICIPATION TIMING

产品规格

应用手册

简报

手册

样片和购买

质量和可靠性