• 简体中文
• English

VN5T016AH-E：Single Channel High Side Driver with Analog Current Sense for 24V Automotive Applications

The VN5T016AH-E is a device made using STMicroelectronics^®VIPower^®technology, intended for driving resistive or inductive loads with one side connected to ground. Active V_CCpin voltage clamp protects the device against low energy spikes. This device integrates an analog current sense which delivers a current proportional to the load current. Fault conditions such as overload, overtemperature or short to V_CCare reported via the current sense pin.

Output current limitation protects the device in overload condition. The device latches off in case of overload or thermal shutdown.

The device is reset by a low level pass on the fault reset standby pin.

A permanent low level on the inputs and fault reset standby pin disables all outputs and sets the device in standby mode.

Key Features

• General
  • Very low stand-by current
  • 3.0 V CMOS compatible input
  • Optimized electromagnetic emission
  • Very low electromagnetic susceptibility
  • In compliance with the 2002/95/EC european directive
  • Fault reset standby pin (FR_Stby)
• Diagnostic functions
  • Proportional load current sense
  • Current sense precision for wide range currents
  • Off-state open load detection
  • Output short to VCC detection
  • Overload and short to ground latch-off
  • Thermal shutdown latch-off
  • Very low current sense leakage
• Protections
  • Undervoltage shutdown
  • Overvoltage clamp
  • Load current limitation
  • Self limiting of fast thermal transients
  • Protection against loss of ground and loss of VCC
  • Thermal shutdown
  • Reverse battery protected with self switch of the PowerMOS
  • Electrostatic discharge protection

产品规格

用户手册

HW Model & CAD Libraries

手册

Evaluation Tool Software

样片和购买

质量和可靠性