ADM1063 Multisupply Supervisor/Sequencer with ADC and Temperature Monitoring

Central office systems Servers/routers Multivoltage system line cards DSP/FPGA supply sequencing In-circuit testing of margined supplies

The ADM1063 is a configurable supervisory/sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple supply systems. In addition to these functions, the ADM1063 integrates a 12-bit ADC that can be used to accurately read back up to 12 separate voltages.

The device also provides up to 10 programmable inputs for monitoring under, over, or out-of-window faults on up to 10 supplies. In addition, 10 programmable outputs can be used as logic enables. Six of these programmable outputs can provide up to a 12 V output for driving the gate of an n-FET that can be placed in the path of a supply.

Applications

Features and Benefits

Complete supervisory and sequencing solution for up to 10 supplies

10 supply fault detectors enable supervision of supplies to

<0.5% accuracy at all voltages at 25°C
<1.0% accuracy across all voltages and temperatures

<0.5% accuracy at all voltages at 25°C

<1.0% accuracy across all voltages and temperatures

5 selectable input attenuators allow supervision of supplies to

14.4 V on VH
6 V on VP1 to VP4 (VPx)

14.4 V on VH

6 V on VP1 to VP4 (VPx)

See data sheet for additional features

Download ADM1063-EP data sheet (pdf)

Power Management

Data Sheets

Document	note
ADM1063: Multisupply Supervisor/Sequencer with ADC and Temperature Monitoring Data Sheet (Rev. C)	PDF 664 kB
ADM1063-EP: Enhanced Product Data Sheet (Rev. A)	PDF 401.29 K

Application Notes

Document	note
AN-1009: Block Erasing, Reading and Writing to the ADM106x EEPROM (Rev. A)	PDF 63 kB
AN-1086: Using an ADM106x in a Hot Swap Application (Rev. 0)	PDF 59 kB
AN-0997: Ping-Pong Configuration Guide for ADM1062 to ADM1069 Devices (Rev. A)	PDF 172 kB
AN-1001: Checksum Calculations (Rev. A)	PDF 76 kB
AN-897: ADC Readback Code (Rev. A)	PDF 65 kB
AN-0973: Erasing and Programming the Sequencing Engine EEPROM (Rev. A)	PDF 61 kB
AN-0975: Automatic Generation of State Diagrams for the ADM1062 to ADM1069 Using Graphviz (Rev. A)	PDF 209 kB
AN-722: Watchdog Detection Using the ADM106x (Rev. 0)	PDF 179 kB
AN-698: Configuration Registers of ADM1062/ADM1063/ADM1064/ADM1065/ADM1066/ADM1067/ADM1166 (Rev. C)	PDF 561 kB
AN-782: Monitoring High Voltages with the ADM1062-ADM1069 Super Sequencers™ (Rev. 0)	PDF 61 kB
AN-781: Monitoring Additional Supplies with the ADM1062-ADM1069 Super Sequencers™ (Rev. 0)	PDF 96 kB
AN-780: Monitoring Negative Voltages with the ADM1062 to ADM1069 Super Sequencers (Rev. A)	PDF 98 kB
AN-723: Interrupt Generation Using the ADM106x (Rev. 0)	PDF 262 kB

User Guides

Document	note
UG-404: USB-SDP-CABLEZ Serial Interface Board	PDF 536 kB

Order Information

Part Number	Package	Packing Qty	Temp Range	Price 100-499	Price 1000+	RoHS
ADM1063ACPZ Production	40 ld LFCSP (6x6mm w/4.1mm pad)	OTH 490	-40 to 85C	9.57	8.77	Y
ADM1063ACPZ-REEL7 Production	40 ld LFCSP (6x6mm w/4.1mm pad)	REEL 750	-40 to 85C	0	8.77	Y
ADM1063ASUZ Production	48 ld TQFP (7x7mm)	OTH 250	-40 to 85C	9.57	8.77	Y
ADM1063ASUZ-REEL7 Production	48 ld TQFP (7x7mm)	REEL 500	-40 to 85C	9.57	8.77	Y
ADM1063BCPZ-EP-RL7 Production	40 ld LFCSP (6x6mm w/4.1mm pad)	REEL 750	-40 to 105C	0	35	Y

Evaluation Boards

Part Number	Description	Price	RoHS
EVAL-ADM1063TQEBZ	Evaluation board for device allowing user to configure the board to match their own configuration. The kit includes a TQFP socket. Multiple boards can be cascaded (cable included), allowing evaluation of multi-device systems.	318.78	Y
SOCKET-ADM106XLFZ	Optional LFCSP Socket for ADM1062-67 and ADM1166. This can be used with the evaluation board if required.	120	Y
SOCKET-ADM106XTQZ	Optional TQFP Socket for ADM1062-67 and ADM1166. This can be used with the evaluation board if required.	95	Y
USB-SDP-CABLEZ	USB to Serial I/O Interface. One is required and can support multiple eval kits.	89	Y