AH3768Q：Single Output _ BDTIC a Leading Distributor in China

AH3768Q：Single Output

Part Number	Data Sheet	SPICE Model	Qualified to AECQ10x	PPAP Capable	Operating Voltage (V)	Average Supply Current (mA)	Output Current Capability (mA)	Grade	Operating Point Bop (Bops +ve/ Bopn -ve) Gauss (Min)	Operating Point Bop (Bops +ve/ Bopn -ve) Gauss (Typ)	Operating Point Bop (Bops +ve/ Bopn -ve) Gauss (Max)	Release Point Brp (Brps +ve/Brpn -ve) Gauss (Min)	Release Point Brp (Brps +ve/Brpn -ve) Gauss (Typ)	Release Point Brp (Brps +ve/Brpn -ve) Gauss (Max)	Operating Ambient Temperature (°C)
AH3768Q	AH3768Q.pdf	-	Yes	Yes	3.0 to 28	3	30	-	140	175	200	-200	-175	-200	-40 to +150

Description

The AH3768Q is an AECQ100 qualified high voltage low sensitivity Automotive Hall Effect latch IC designed for brushless DC motor commutation, speed measurement, angular or linear encoders and position sensors in automotive applications. To support wide range of demanding applications, the design has been optimized to operate over the supply range of 3.0V to 28V. With chopper stabilized architecture and an internal bandgap regulator to provide temperature compensated supply for internal circuits, the AH3768Q provides a reliable solution over the whole operating range. For robustness and protection, the device has a reverse blocking diode with a Zener clamp on the supply. The output has a current limit and a Zener clamp. The single open drain output can be switched on with South pole of sufficient strength and switched off with North pole of sufficient strength. When the magnetic flux density (B) perpendicular to the package is larger than the operate point (Bop) the output is switched on (pulled low). The output is held latched until magnetic flux density reverses and becomes lower than the release point (Brp). The AH3768Q is available in industry standard SOT23 and SIP-3 packages.

Application

Automotive motor commutation, position control and speed sensing. Window lifter, Sun roof, Wiper, Tailgates, Power Seat, water, oil and fuel pumps

Features

Bipolar Latch Operation (South Pole: On, North Pole: off)
High Sensitivity: Bop and Brp of +175G and -175G Typical
Single Open Drain Output with Current Limit
3.0V to 28V Operating Voltage Range
Chopper Stabilized Design Provides
     o Superior Temperature Stability
     o Minimal Switch Point Drift
     o Enhanced Immunity to Stress
Good RF Noise Immunity
Reverse Blocking Diode and Zener Clamp on Supply
-40C to 150C Operating Temperature
ESD: HBM ＞ 8KV, CDM: >2kV
AECQ100 Qualified
Industry Standard SOT23 and SIP-3L Packages
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)