AL3159:LED Drivers for Displays / Backlights

Part NumberData SheetSPICE ModelFunctionMinimumInput Voltage (V)MaximumInput Voltage (V)Maximum Output Voltage (V)Number of Regulated Output ChannelsMaximum Output Current per Channel (mA)Typical Over-Current Protection Current (mA)Switching Frequency (MHz)Efficiency (%)Quiescent Current (mA)Standby Quiescent Current (µA)SW RDS(ON) (Ω)DimmingOVPSoft StartVFB (V)OperatingTemperatureRange (°C)
AL3159AL3159.pdf-Charge Pump LED Driver2.75.55.5930-1.293210.5PWMYesYes--40 to +85
Description

The AL3159 is a low noise, constant frequency charge pump DC/DC converter that uses a Dual mode load switch (1X), and (2X) conversion for white °C applications. The AL3159 is capable of driving nine °C channels at 20mA from a 2.7V to 5.5V input. The current sinks may be operated using three simple logic control inputs individually or in parallel for driving higher-current °Cs. Low external part counts (one 1µF flying capacitor and two 2.2µF capacitors at VIN and VOUT) make this part ideally suited for small, battery-powered applications. AL3159 digital inputs are used to enable or disable the °C channels with a fixed default current settings at 20mA. Each output of the AL3159 is equipped with built-in protection for VOUT short circuit and auto-disable for °C short conditions. Built-in soft-start circuitry prevents excessive inrush current during start-up and mode switching. A low-current shutdown feature disconnects the load from VIN to reduce quiescent current less than 1µA. The AL3159 is available in a lead-free, space-saving, thermally enhanced 20-pin 3 x 3mm QFN package.

Application
  • Mobile Phone White LED Backlighting and Indicators
  • PDA White LED backlighting
  • Battery-operated Phone Main and Sub Screen White LED Backlighting
QFN3030-20
AL3159.pdf AL3159
PAM8001 anti-saturation filterless 2w class-d stereo amplifierwith dc volume control and max output power setting PAM8001
PAM8001 anti-saturation filterless 2w class-d stereo amplifierwith dc volume control and max output power setting PAM8001