ZXCT1051：Voltage Output
| Part Number | Data Sheet | SPICE Model | Qualified to AECQ10x | PPAP Capable | Minimum VCC/VB Supply Voltage (V) | Maximum VCC/VB Supply Voltage (V) | Minimum S+ Common-Mode Sense Voltage (V) | Maximum S+ Common-Mode Sense Voltage (V) | Maximum Output Voltage (V) | Maximum Sense Voltage (V) | Accuracy @ VSENSE =100mV (%) | Quiescent Current (µA) | Gain Output/VSENSE | Bandwidth typ (MHz) | Operating Ambient Temperature Range (°C) | Special Features |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZXCT1051 | ZXCT1051.pdf | - | - | - | 2.5 | 20 | - | VCC-2 | VCC-2 | 0.3 | 0 | 50 | 10 | 2 | -40 to +125 | Separate Vcc Pin + Extended Temp Range + Short Circuit Protection |
Description
The ZXCT1051 is a wide input range current monitor, which operates over a range of input voltages from ground up to VCC-2V. As a result the ZXCT1051 can be used on the high or low side of the load. The very low offset voltage enables a typical accuracy of 1% for sense voltages of only 30mV, giving better tolerances for small sense resistors necessary at higher currents.
Application
- Power supply
- DC motor and solenoid control
- Battery management
- Over current monitor
- Power management
- Short circuit detection
Features
- Accurate down to end current sensing
- Output voltage scaling x10
- 0 to VCC-2V sense input range
- 2.7 to 20V supply range
- 50 μA quiescent current
- 1% typical accuracy
- SOT23-5 package
Ordering Information
- ZXCT1051E5TA
SOT25
- ZXCT1051.pdf ZXCT1051
