TLE4206-2G
The TLE4206-2G is a protected H-Bridge Driver designed specifically for automotive headlight beam control and industrial servo control applications. The part is built using Infineons bipolar high voltage power technology DOPL.The standard enhanced power PG-DSO-14-22 package meets the application requirements and saves PCB-board space and costs. Moreover the package is RoHS compliant. The servo-loop-parameter pos.- and neg. Hysteresis, pos.- and neg. deadband and angle-amplification are programmable with external resistors. An internal window-comparator controls the input line. In the case of a fault condition, like short circuit to GND, short circuit to supply-voltage, and broken wire, the TLE4206-2G stops the motor immediately (brake condition). urthermore the built in features like over- and undervoltage-lockout, short-circuit-protection and over-temperature-protection will open a wide range of automotive- and industrial applications. The TLE4206-2G is a design-version of the TLE4206. In the TLE4206-2G, the current peak blanking Pin is disconnected. A hysteresis is introduced at the lower RANGE threshold. This allows reliable de-activation of the device by pulling the RANGE input to GND also under critical application conditions.
| Parametric | TLE4206-2G |
|---|
| IPeak | 2 x 1.0 A |
|---|
| Inhibit | N |
|---|
| Iq | 10.0µA |
|---|
| Mounting | SMT |
|---|
| Technology | Bipolar |
|---|
| IQ (multiple) | 2 x 0.8 A |
|---|
| Package | PG-DSO-14-8 |
|---|
| Protect | short circuit e.a. |
|---|
| Operating Temperature
min
max | -40.0°C
150.0°C |
|---|
| Sales Product Name | TLE4206-2G |
|---|
| OPN | TLE42062GXUMA1 |
|---|
| Product Status | active and preferred |
|---|
| Package Name | PG-DSO-14 |
|---|
| Completely lead free | yes |
|---|
| Halogen free | yes |
|---|
| RoHS compliant | yes |
|---|
| Packing Size | 2500 |
|---|
| Packing Type | TAPE & REEL |
|---|
| Moisture Level | 3 |
|---|
| Summary of Features:- Optimized for headlight beam control applications
- Delivers up to 0.8A continuous
- Low saturation voltage; typ.1.2V total @ 25°C; 0.4A
- Output protected against short circuit
- Overtemperature protection with hysteresis
- Over- and undervoltage lockout
- No crossover current
- Internal clamp diodes
- Enhanced power packages
- Range low-voltage detection with hysteresis
- Green Product (RoHS compliant)
- AEC Qualified
Benefits:- Amplification and angle shift can be adjusted with external resistors
- Range Input to protect reference potentiometer against short circuit
- Hysteresis on range input switch-off voltage low
Target Applications:- Vertical light leveling using servo motors
- Applications with smalll servo motors
 |
Data Sheet
Product Selection Guide
Material Content SheetInfo
PCB Design Data
Package Data
PCB Design Data
