TLE8209-4SA

The TLE8209-4SA is a SPI programmable H-bridge, designed for the control of DC motors in safety critical automotive applications. It features four selectable current ranges, two selectable slew rate settings and extensive diagnosis via SPI. The device monitors the digital supply voltage V DD and shuts down the output stages in case of V DD over- or undervoltage, thus providing a safe switch off path in case of malfunction of the digital control circuitry. In order to reduce power dissipation in extreme thermal conditions the current limitation threshold is reduced linearly for junction temperatures over 165°C. A thermal warning bit is set in the SPI. The two half bridges can also be used independently to drive two separate loads like solenoids or unidirectional DC motors.

ParametricTLE8209-4SA
RDS (on) (switch)125.0mΩ
RDS (on)125.0mΩ
ID(lim)(multiple)8.6 A
ID(lim)(multiple)9.0 A
Iq20.0µA
Operating Voltage  min  max4.5V  28.0V
DiagnosticsSPI & Status Flag
ProtectOT
ProtectSC
ProtectUV
InhibitNo
Temperature- 40°C - 150°C
MountingSMT
Sales Product NameTLE8209-4SA
OPNTLE82094SACUMA1
Product Statusactive and preferred
Package NamePG-DSO-20
Completely lead freeno
Halogen freeavailable
RoHS compliantyes
Packing Size800
Packing TypeTAPE & REEL
Summary of Features:
  • Programmable current limitation from 1.8 to 10.6 A typ.
  • Full path R DSon of 240 mΩ (typ. at Tj=25°C)
  • Operating battery supply voltage 4.5 V to 28 V
  • Operating logic supply voltage 4.4 to 5.25 V
  • Low standby current (8 µA typ.)
  • Logic inputs TTL/CMOS-compatible
  • All I/O pins overvoltage tolerant up to 18 V
  • Enable and disable input
  • Short circuit and overtemperature protection
  • V S undervoltage protection
  • V DD over and undervoltage protection
  • Open load detection in off condition
  • Temperature dependent current reduction
  • Extensive diagnosis capabilities via SPI interface
  • Status Flag for basic diagnosis without SPI
  • Configurable as H-bridge or two independent half bridges
  • Control of power stages by parallel inputs or via SPI
  • Output switching frequency up to 11 kHz
  • Slewrate programmable through SPI
  • Excellent EMC performance
  • AEC qualified
  • Green product (RoHS compliant)
Benefits:
  • Full protection and diagnosis capability enables for use in safety relevant applications, covers full automotive temperature range
  • No external freewheeling diodes required SPI interface enables direct communictation with microcontroller
Target Applications:
  • Electronic Throttle Control
  • Exhaust Gas Recirculation System
  • Variable Turbo Geometry
  • Waste Gate
  • Resonant Charging Flaps
  • Swirl & Tumble flaps
  • Variable Valve timing
Data Sheet
TitleSizeDateVersion
TLE8209-4SA Data Sheet,EN698 KB22 Oct 201401_02
Application Brochure
TitleSizeDateVersion
Automotive Sytem Solution Guide7.2 MB12 Apr 2012
Product Selection Guide
TitleSizeDateVersion
Automotive Power Selection GuideEN10.6 MB19 Jan 201601_01
Material Content SheetInfo
TitleSizeDateVersion
MCDS_2013-08-28_22-31-56_MA001024936_PG-DSO-20-65.pdf23 KB31 Oct 201301_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Powertrain_H-Bridges_for_Electronic_Throttle_Control - Altium - v1.0261 KB16 Oct 201301_00
PCB Footprints & Symbols - Powertrain_H-Bridges_for_Electronic_Throttle_Control - Cadence - v1.0205 KB16 Oct 201301_00
PCB Footprints & Symbols - Powertrain_H-Bridges_for_Electronic_Throttle_Control - Eagle - v1.040 KB16 Oct 201301_00
PCB Footprints & Symbols - Powertrain_H-Bridges_for_Electronic_Throttle_Control - Mentor - v1.0243 KB16 Oct 201301_00
PCB Footprints & Symbols - Integrated_High_Current_Motor_Drivers - Altium - v1.0699 KB24 Oct 201301_00
PCB Footprints & Symbols - Integrated_High_Current_Motor_Drivers - Cadence - v1.0587 KB24 Oct 201301_00
PCB Footprints & Symbols - Integrated_High_Current_Motor_Drivers - Eagle - v1.0108 KB24 Oct 201301_00
PCB Footprints & Symbols - Integrated_High_Current_Motor_Drivers - Mentor - v1.0659 KB24 Oct 201301_00
Package Data
TitleSizeDateVersion
PG-DSO-20-65 | TLE82094SACUMA1EN521 KB11 Apr 201601_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Powertrain_H-Bridges_for_Electronic_Throttle_Control - Altium - v1.0261 KB16 Oct 201301_00
PCB Footprints & Symbols - Powertrain_H-Bridges_for_Electronic_Throttle_Control - Cadence - v1.0205 KB16 Oct 201301_00
PCB Footprints & Symbols - Powertrain_H-Bridges_for_Electronic_Throttle_Control - Eagle - v1.040 KB16 Oct 201301_00
PCB Footprints & Symbols - Powertrain_H-Bridges_for_Electronic_Throttle_Control - Mentor - v1.0243 KB16 Oct 201301_00
PCB Footprints & Symbols - Integrated_High_Current_Motor_Drivers - Altium - v1.0699 KB24 Oct 201301_00
PCB Footprints & Symbols - Integrated_High_Current_Motor_Drivers - Cadence - v1.0587 KB24 Oct 201301_00
PCB Footprints & Symbols - Integrated_High_Current_Motor_Drivers - Eagle - v1.0108 KB24 Oct 201301_00
PCB Footprints & Symbols - Integrated_High_Current_Motor_Drivers - Mentor - v1.0659 KB24 Oct 201301_00
EN TLE8209-4SA
Automotive Sytem Solution Guide TLE8209-4SA
EN TLE8203E
MCDS_2013-08-28_22-31-56_MA001024936_PG-DSO-20-65.pdf TLE8209-4SA
EN TLE8209-4SA
PCB Footprints & Symbols - Powertrain_H-Bridges_for_Electronic_Throttle_Control - Mentor - v1.0 BTM7750GP
PCB Footprints & Symbols - Integrated_High_Current_Motor_Drivers - Altium - v1.0 BTM7750GP
PCB Footprints & Symbols - Integrated_High_Current_Motor_Drivers - Cadence - v1.0 BTM7750GP
PCB Footprints & Symbols - Integrated_High_Current_Motor_Drivers - Eagle - v1.0 BTM7750GP
PCB Footprints & Symbols - Integrated_High_Current_Motor_Drivers - Mentor - v1.0 BTM7750GP