• 简体中文
• English

LT1353 - Dual and Quad 250uA, 3MHz, 200V/us Operational Amplifier

The LT®1352/LT1353 are dual and quad, very low power, high speed operational amplifiers with outstanding AC and DC performance. The amplifiers feature much lower supply current and higher slew rate than devices with comparable bandwidth. The circuit combines the slewing performance of a current feedback amplifier in a true operational amplifier with matched high impedance inputs. The high slew rate ensures that the large-signal bandwidth is not degraded. Each output is capable of driving a 1k Ohm load to ±13V with ±15V supplies and a 500W load to ±3.4V on ±5V supplies.

The LT1352/LT1353 are members of a family of fast, high performance amplifiers using this unique topology and employing Linear Technology Corporation’s advanced complementary bipolar processing. For higher bandwidth devices with higher supply current see the LT1354 through LT1365 data sheets. Bandwidths of 12MHz, 25MHz, 50MHz and 70MHz are available with 1mA, 2mA, 4mA and 6mA of supply current per amplifier. Singles, duals and quads of each amplifier are available. The LT1352 is available in an 8-lead SO package. The LT1353 is offered in a 14-lead narrow surface mount package.

Features 3MHz Gain Bandwidth 200V/µs Slew Rate 250µA Supply Current per Amplifier C-Load™ Op Amp Drives All Capacitive Loads Unity-Gain Stable Maximum Input Offset Voltage: 600µV Maximum Input Bias Current: 50nA Maximum Input Offset Current: 15nA Minimum DC Gain, RL = 2k: 30V/mV Input Noise Voltage: 14nV/rt Hz Settling Time to 0.1%, 10V Step: 700ns Settling Time to 0.01%, 10V Step: 1.25µs Minimum Output Swing into 1k: ±13V Minimum Output Swing into 500 ohms: ±3.4V Specified at ±2.5V, ±5V and ±15V Available in SO-8 Package LT1353 in Narrow Surface Mount Package Typical Application

Applications Battery-Powered Systems Wideband Amplifiers Buffers Active Filters Data Acquisition Systems Photodiode Amplifiers Packaging