LTC2348-18 - Octal, 18-Bit, 200ksps Differential ±10.24V Input SoftSpan ADC with Wide Input Common Mode Range

The LTC®2348-18 is an 18-bit, low noise 8-channel simultaneous sampling successive approximation register (SAR) ADC with differential, wide common mode range inputs. Operating from a 5V low voltage supply, flexible high voltage supplies, and using the internal reference and buffer, each channel of this SoftSpanTM ADC can be independently configured on a conversion-by-conversion basis to accept ±10.24V, 0V to 10.24V, ±5.12V, or 0V to 5.12V signals. Individual channels may also be disabled to increase throughput on the remaining channels.

The wide input common mode range and 118dB CMRR of the LTC2348-18 analog inputs allow the ADC to directly digitize a variety of signals, simplifying signal chain design. This input signal flexibility, combined with ±3LSB INL, no missing codes at 18 bits, and 96.7dB SNR, makes the LTC2348-18 an ideal choice for many high voltage applications requiring wide dynamic range.

The LTC2348-18 supports pin-selectable SPI CMOS (1.8V to 5V) and LVDS serial interfaces. Between one and eight lanes of data output may be employed in CMOS mode, allowing the user to optimize bus width and throughput.

  • 200ksps per Channel Throughput
  • Eight Simultaneous Sampling Channels
  • ±3LSB INL (Maximum, ±10.24V Range)
  • Guaranteed 18-Bit, No Missing Codes
  • Differential, Wide Common Mode Range Inputs
  • Per-Channel SoftSpan Input Ranges: ±10.24V, 0V to 10.24V, ±5.12V, 0V to 5.12V ±12.5V, 0V to 12.5V, ±6.25V, 0V to 6.25V
  • 96.7dB Single-Conversion SNR (Typical)
  • −109dB THD (Typical) at fIN = 2kHz
  • 118dB CMRR (Typical) at fIN = 200Hz
  • Rail-to-Rail Input Overdrive Tolerance
  • Guaranteed Operation to 125°C
  • Integrated Reference and Buffer (4.096V)
  • SPI CMOS (1.8V to 5V) and LVDS Serial I/O
  • Internal Conversion Clock, No Cycle Latency
  • 140mW Power Dissipation (Typical)
  • 48-Lead (7mm x 7mm) LQFP Package
Typical Application
LTC2348-18 Typical Application
LTC2348-18 Typical Application
  • Programmable Logic Controllers
  • Industrial Process Control
  • Power Line Monitoring
  • Test and Measurement
LTC2348-18 Package Drawing
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTC2348CLX-18#PBF7x7 LQFP-48C$33.36$23.35
LTC2348HLX-18#PBF7x7 LQFP-48H$44.07$30.85
LTC2348ILX-18#PBF7x7 LQFP-48I$38.36$26.85
Demo Boards
Part NumberDescriptionPrice
DC2094A-ALTC2348-18 Demo Board | Octal, Simultaneous, 18-Bit, 200ksps SAR ADC (req DC590, DC2026 or DC890)$150.00
Companion Boards
Part NumberDescriptionPrice
DC2026CLinduino One Isolated USB Demo Board: An Arduino- and QuikEval-Compatible Code Development Platform$75.00
DC590BIsolated USB Serial Controller for Linear Technology QuikEval-Compatible Demo Boards$50.00
DC890BUSB Data Acquisition Controller, for PScope Evaluation Kits (up to 250Mbps, CMOS/LVDS)$300.00
Design Note
Reliability Data
Product Selector Card
Press Release
Software and Simulation
CAD Symbol
Related Products
LTC2348-18 - 具宽输入共模范围的 8 通道、18 位、200ksps、差分 ±10.24V 输入 SoftSpan ADC
LTC2348-18 - Octal, 18-Bit, 200ksps Differential ±10.24V Input SoftSpan ADC with Wide Input Common Mode Range
DN541 - 微功率运算放大器可在不牺牲准确度或超出功率预算的情况下 驱动 8 通道 18 位同时采样 ADC
8 通道、同时采样 ADC 实现真正 18 位性能并提供前所未有的灵活性
DN541 - Micropower Op Amp Drives 8-Channel 18-Bit Simultaneous Sampling ADC without Compromising Accuracy or Breaking the Power Budget
R549 - Reliability Data
18-Bit Simultaneous Sampling ADC with ±10.24V SoftSpan Inputs
Isolated Data Conversion
Precision Signal Chain Products Selector Guide
Octal, Simultaneous Sampling ADC Achieves True 18-Bit Performance with Unprecedented Flexibility
DC2094A/DC2326A/DC2365A CPLD Source Code
LTC2348 IBIS Model
LTC2348-18 Footprints and Symbols
LTC2348 - DC2094A.ino
LTC2348 Linduino Header File
LTC2348 Linduino.CPP