LTC3886 - 60V Dual Output Step-Down Controller with Digital Power System Management

The LTC®3886 is a dual PolyPhase DC/DC synchronous step-down switching regulator controller with I2C-based PMBus compliant serial interface. This controller employs a constant-frequency, current-mode architecture, with high voltage input and output capability along with programmable loop compensation. The LTC3886 is supported by the LTpowerPlay™ software development tool with graphical user interface (GUI).

The EXTVCC pin supports voltages up to 14V allowing for optimized circuit efficiency and die temperature, and for the controller output to supply the chip power. Switching frequency, output voltage, and device address can be programmed both by digital interface as well as external configuration resistors. Parameters can be set via the digital interface or stored in EEPROM. Both outputs have an independent power good indicator and FAULT function.

The LTC3886 can be configured for discontinuous (pulseskipping) mode or continuous inductor current mode.

Features
  • PMBus/I2C Compliant Serial Interface – Telemetry Read-Back Includes VIN, IIN, VOUT, IOUT,Temperature and Faults – Programmable Voltage, Current Limit, Digital Soft-Start/Stop, Sequencing, Margining, OV/UV/OC, Frequency, and Control Loop Compensation
  • Output Error Less Than ±0.5% Over Temperature
  • Integrated 16-Bit ADC and 12-Bit DAC
  • Integrated High Side Current Sense Amplifier
  • Internal EEPROM and Fault Logging
  • Integrated N-Channel MOSFET Gate Drivers
  • Wide VIN Range: 4.5V to 60V
  • VOUT0, VOUT1 Range: 0.5V to 13.8V
  • Analog Current Mode Control
  • Accurate PolyPhase® Current Sharing for Up to 6 Phases (100kHz to 750kHz)
  • Available in a 52-Lead (7mm × 8mm) QFN Package
Typical Application

Applications
  • Telecom, Datacom, and Storage Systems
  • Industrial and Point of Load Applications
Packaging
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTC3886EUKG#PBF7x8 QFN-52E$9.07$6.35
LTC3886EUKG#TRPBF7x8 QFN-52E$6.41
LTC3886IUKG#PBF7x8 QFN-52I$9.91$6.94
LTC3886IUKG#TRPBF7x8 QFN-52I$7.00
Demo Boards
Part NumberDescriptionPrice
DC2155A-ALTC3886EUKG Demo Board | Dual Digital PSM Buck; 18V ≤ VIN ≤ 54V; Vout0/Vout1 = 12V/5V @ 12AContact Factory
DC2277ALTC3886 UKG Package Clamshell Programming Demo BoardContact Factory
Companion Boards
Part NumberDescriptionPrice
DC1613AUSB-to-PMBus Controller for Use with LTpowerPlay$50.00
Datasheet
Application Note
Reliability Data
Product Selector Card
LT Journal
Press Release
CAD Symbol CAD Symbols and Footprints: The downloadable Zip file below contains the schematic symbol and PCB footprint compatible with Cadence ORCAD® v16.5 or later, Mentor Graphics PADS® v9.5 or later, and Altium 14.2.5 or later.
Ad
Related Product
LTC3886 - 60V Dual Output Step-Down Controller with Digital Power System Management
Product Errata - LTC3886
AN145 - Overview of the EEPROM in LTC PSM Devices
R526 - Reliability Data
Digital Power System Management
The Evolution of High Voltage Digital Power System Management
高压数字电源系统管理的发展
具 I2C/PMBus 数字控制和可编程环路补偿的 60V 双通道 DC/DC 控制器
LTC3886 Footprints and Symbols
60V I2C Programmable Power
LTC3886 - Linduino CPP File
LTC3886 - Linduino Header File