LTM9100 - Anyside™ High Voltage Isolated Switch Controller with I²C Command and Telemetry

The LTM®9100 μModule® (micromodule) controller is a complete, galvanically isolated switch controller with I2C interface, for use as a load switch or hot swap controller. The load is soft started and controlled by an external N-channel MOSFET switch. Overcurrent protection minimizes MOSFET stress during start-up, input step and output short-circuit conditions. Owing to the isolated, floating character of the switch, it is easily configured for use in high side, low side and floating applications.

A single 5V supply powers both sides of the switch controller through an integrated, isolated DC/DC converter. A separate logic supply input allows easy interfacing with logic levels from 3V to 5.5V, independent of the main supply. Isolated measurements of load current and two additional voltage inputs are made by a 10-bit ADC, and accessed via the I2C interface.

The logic and I2C interface is separated from the switch controller by a 5kVRMS isolation barrier, making the LTM9100 ideal for systems where the switch operates on buses up to 1000VDC, as well as for providing galvanic isolation in systems where a ground path is broken to allow large common mode voltage swings. Uninterrupted communication is guaranteed for common mode transients of up to 30kV/μs.

Features
  • UL-CSA Recognition Pending: 5kVRMS for One Minute
  • Reinforced Insulation
  • Integrated Isolated Power Supply
  • Adjustable Turn-On Ramp Rate and Current Limit
  • I2C/SMBus Interface
  • 10-Bit ADC Monitors Current and Two Uncommitted Channels
  • High Common Mode Transient Immunity: ≥ 30kV/μs
  • Fault Status Alert and Power Good Outputs
  • Independent 3V to 5.5V Logic Supply
  • ±20kV ESD Across the Isolation Barrier
  • Maximum Continuous Working Voltage: 690VRMS
  • 14.6mm Creepage Distance
  • Low Current Shutdown Mode (<10μA)
  • 22mm × 9mm × 5.16mm BGA Package
Typical Application
LTM9100 Typical Application
LTM9100 Typical Application
Applications
  • High Voltage DC Hot Swap
  • Live Backplane Insertion
  • Isolated Distributed Power Systems
  • Power Monitors
  • Industrial Control Systems
  • Breaking Ground Loops
Packaging
LTM9100 Package Drawing
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTM9100CY#PBF22mm x 9mm x 5.16mm BGAC$27.79$19.45
LTM9100HY#PBF22mm x 9mm x 5.16mm BGAH$33.57$23.50
LTM9100IY#PBF22mm x 9mm x 5.16mm BGAI$30.56$21.40
Demo Boards
Part NumberDescriptionPrice
DC2423A-ALTM9100 Demo Board | Isolated 48V Switch Controller with Telemetry [requires DC590 or DC2026]$150.00
DC2423A-BLTM9100 Demo Board | Isolated 380V Switch Controller with Telemetry [requires DC590 or DC2026]$150.00
Companion Boards
Part NumberDescriptionPrice
DC2026CLinduino One Isolated USB Demo Board: An Arduino- and QuikEval-Compatible Code Development Platform$75.00
DC590BIsolated USB Serial Controller for Linear Technology QuikEval-Compatible Demo Boards$50.00
Datasheet
Product Selector Card
Press Release
Related Products
LTM9100 - Anyside™ High Voltage Isolated Switch Controller with I2C Command and Telemetry
隔离式 Anyside 开关控制器保护和监视 高达 1000VDC 的电源
5kVRMS Isolated Switch Controller with Telemetry
Isolated Anyside Switch Controller Protects & Monitors Up to 1000VDC Power Supplies