DS1245W:3.3V 1024k Nonvolatile SRAM

The DS1245W 3.3V 1024k Nonvolatile SRAM is a 1,048,576-bit, fully static, nonvolatile SRAM organized as 131,072 words by 8 bits. Each NV SRAM has a self-contained lithium energy source and control circuitry which constantly monitors VCC for an out-of-tolerance condition. When such a condition occurs, the lithium energy source is automatically switched on and write protection is unconditionally enabled to prevent data corruption. DIP-package DS1245W devices can be used in place of existing 128k x 8 static RAMs directly conforming to the popular bytewide 32-pin DIP standard. DS1245W devices in the PowerCap Module package are directly surface mountable and are normally paired with a DS9034PC PowerCap to form a complete Nonvolatile SRAM module. There is no limit on the number of write cycles that can be executed and no additional support circuitry is required for microprocessor interfacing.

Key Features
  • 10 years minimum data retention in the absence of external power
  • Data is automatically protected during power loss
  • Replaces 128k x 8 volatile static RAM, EEPROM or Flash memory
  • Unlimited write cycles
  • Low-power CMOS
  • Read and write access times of 100ns
  • Lithium energy source is electrically disconnected to retain freshness until power is applied for the first time
  • Optional industrial temperature range of -40°C to +85°C, designated IND
  • JEDEC standard 32-pin DIP package
  • PowerCap Module (PCM) package
    • Directly surface-mountable module
    • Replaceable snap-on PowerCap provides lithium backup battery
    • Standardized pinout for all nonvolatile SRAM products
    • Detachment feature on PowerCap allows easy removal using a regular screwdriver
DS1245W: Pin Assignment
DS1245W: Pin Assignment
DataSheet
titleDownload file
DS1245W Data SheetDS1245W.pdf
Parametrics
Part NumberMemory TypeMemory SizeBus TypeVSUPPLY
(V)
VSUPPLY
(V)
Package/PinsBudgetary
Price
minmaxSee Notes
DS1245WNV SRAM128K x 8Parallel33.6EDIP/32
PCAP/34
$18.92 @1k
Quality and Environmental Data
Ordering Information
Part NumberNotesStatusRecommended ReplacementPackageTempRoHS
DS1245W-1003.3V, 100nsNo Longer AvailableDS1245W-100+EDIP,;32 pin;707.2 mm²0°C to +70°CSee data sheet
DS1245W-100+ActiveEDIP,;32 pin;707.2 mm²0°C to +70°CLead Free
DS1245W-100IND3.3V, 100nsNo Longer AvailableDS1245W-100IND+EDIP,;32 pin;707.2 mm²-40°C to +85°CSee data sheet
DS1245W-100IND+ActiveEDIP,;32 pin;707.2 mm²-40°C to +85°CLead Free
DS1245W-1503.3V, 150nsNo Longer AvailableDS1245W-100+EDIP,;32 pin;707.2 mm²0°C to +70°CSee data sheet
DS1245W-150+ActiveEDIP,;32 pin;707.2 mm²0°C to +70°CLead Free
DS1245WP-1003.3V, 100nsNo Longer AvailableDS1245WP-100+PCAP,;34 pin;596.9 mm²0°C to +70°CSee data sheet
DS1245WP-100+ActivePCAP,;34 pin;596.9 mm²0°C to +70°CLead Free
DS1245WP-100IND3.3V, 100nsNo Longer AvailableDS1245WP-100IND+PCAP,;34 pin;596.9 mm²-40°C to +85°CSee data sheet
DS1245WP-100IND+ActivePCAP,;34 pin;596.9 mm²-40°C to +85°CLead Free
Part NumberNotesStatusRecommended ReplacementPackageTempRoHS
DS1245WP-1503.3V, 150nsNo Longer AvailableDS1245WP-100+PCAP,;34 pin;596.9 mm²0°C to +70°CSee data sheet
DS1245WP-150+ActivePCAP,;34 pin;596.9 mm²0°C to +70°CLead Free
DS1245W.pdf DS1245W
DS1245W.pdf DS1245W
DS1245W.pdf DS1245W
Low-Temperature Data Retention in Nonvolatile SRAM DS1270Y
NV SRAM Device Programmers DS1250Y
Timing Considerations When Using NVSRAM DS1350Y
Tech. Brief 39: NV SRAM Cross Reference Table DS1270Y
NV SRAM Frequently Asked Questions DS1350Y
DS1245W.pdf DS1245W
DS1245W.pdf DS1245W