DS1707:3.3 and 5.0 Volt MicroMonitor

The DS1707/DS1708 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, voltage sense, and external override. A precision temperature-compensated reference and comparator circuit monitor the status of VCC at the device and at an upstream point for maximum protection. When the sense input detects an out-of-tolerance condition a non-maskable interrupt is generated. As the voltage at the device degrades an internal power fail signal is generated which forces the reset to an active state. When VCC returns to an in-tolerance condition, the reset signal is kept in the active state for a minimum of 130ms to allow the power supply and processor to stabilize.

Key Features
  • Holds microprocessor in check during power transients
  • Automatically restarts microprocessor after power failure
  • Monitors pushbutton for external override
  • Accurate 5%, 10% or 20% resets for 3.3V systems and 5% or 10% resets for 5.0V systems
  • Eliminates the need for discrete components
  • 20% tolerance compatible with 3.0V systems
  • Pin compatible with the MAXIM MAX707/MAX708 in 8-pin DIP, 8-pin SO packages
  • 8-pin DIP, 8-pin and µSOP SO and 8-pin µSOP packages available
  • Industrial temperature range -40°C to +85°C
DS1707, DS1708: Block Diagram
DS1707, DS1708: Block Diagram
DataSheet
titleDownload file
DS1707-DS1708 Data SheetDS1707-DS1708.pdf
Parametrics
Part NumberReset Thresh.
(V)
Reset OuttRESETWatchdog FeatureSupervisor FeaturesReset Thresh. Accur.
(%)
ICC
(µA)
Package/PinsBudgetary
Price
min@ +25°CmaxSee Notes
DS17073.3 to 5.5Active High
Active Low
Push-Pull
85ms to 300msNo WatchdogAdjustable Reset Input
Manual Reset
Power Fail Comparator/Low Battery Detect
2.560µMAX/8
PDIP(N)/8
SOIC(N)/8
$2.01 @1k
DS17083.3 to 5.560µMAX/8
PDIP(N)/8
SOIC(N)/8
$1.82 @1k
DS1708R2.5 to 3.350µMAX/8
PDIP(N)/8
SOIC(N)/8
$2.92 @1k
DS1708S2.5 to 3.350µMAX/8
PDIP(N)/8
SOIC(N)/8
$3.90 @1k
DS1708T2.5 to 3.350µMAX/8
PDIP(N)/8
SOIC(N)/8
$3.90 @1k
Quality and Environmental Data
Ordering Information
Part NumberNotesStatusRecommended ReplacementPackageTempRoHS
DS1707EPA5V-5% MonitorNo Longer AvailableDS1707EPA+PDIP(N),;8 pin;79.7 mm²-40°C to +85°CNo
DS1707EPA+ActivePDIP(N),;8 pin;79.7 mm²-40°C to +85°CLead Free
DS1707ESA5V-5% MonitorNo Longer AvailableDS1707ESA+SOIC(N),;8 pin;30.9 mm²-40°C to +85°CNo
DS1707ESA+ActiveSOIC(N),;8 pin;30.9 mm²-40°C to +85°CLead Free
DS1707ESA+T&R5V-5%ActiveSOIC(N),;8 pin;30.9 mm²-40°C to +85°CLead Free
DS1707ESA/T&R5V-5%No Longer AvailableDS1707ESA+T&RSOIC(N),;8 pin;30.9 mm²-40°C to +85°CNo
DS1707EUA5V-5% MonitorNo Longer AvailableDS1707EUA+µMAX,;8 pin;15.6 mm²-40°C to +85°CNo
DS1707EUA+ActiveµMAX,;8 pin;15.6 mm²-40°C to +85°CLead Free
DS1707EUA+T&R5V-5%ActiveµMAX,;8 pin;15.6 mm²-40°C to +85°CLead Free
DS1707EUA/T&R5V-5%No Longer AvailableDS1707EUA+T&RµMAX,;8 pin;15.6 mm²-40°C to +85°CNo
DS1707-DS1708.pdf DS1708
Adding Hysteresis to CPU Supervisor Voltage Sense Inputs Monitoring Upstream Voltage Supplies for Power-Fail Warnings DS1831E
DS1707.pdf DS1707
原理框图 DS1708