DS1982:iButton 1Kb Add-Only

The iButton® 1Kb add-only (DS1982) is a rugged read/write data carrier that identifies and stores relevant information about the product or person to which it is attached. This information can be accessed with minimal hardware, for example, a single port pin of a microcontroller. The DS1982 consists of a factory-lasered registration number that includes an unique 48-bit serial number, an 8-bit CRC, and an 8-bit Family Code (09h) plus 1Kb of EPROM which is user-programmable. The power to program and read the DS1982 is derived entirely from the 1-Wire communication line. Data is transferred serially via the 1-Wire protocol which requires only a single data lead and a ground return. The entire device can be programmed and then write-protected if desired. Alternatively, the part may be programmed multiple times with new data being appended to, but not overwriting, existing data with each subsequent programming of the device. Note: Individual bits can be changed only from a logical 1 to a logical 0, never from a logical 0 to a logical 1. A provision is also included for indicating that a certain page or pages of data are no longer valid and have been replaced with new or updated data that is now residing at an alternate page address. This page address redirection allows software to patch data and enhance the flexibility of the device as a standalone database. The 48-bit serial number that is factory-lasered into each DS1982 provides a guaranteed unique identity which allows for absolute traceability. The durable MicroCan package is highly resistant to harsh environments such as dirt, moisture, and shock. Its compact button-shaped profile is self-aligning with cup-shaped receptacles, allowing the DS1982 to be used easily by human operators or automatic equipment. Accessories permit the DS1982 to be mounted on printed circuit boards, plastic key fobs, photo-ID badges, ID bracelets, and many other objects. Applications include work-in-progress tracking, electronic travelers, access control, storage of calibration constants, and debit tokens.

Key Features
  • 1024 bits Electrically Programmable Read-Only Memory (EPROM) communicates with the economy of one signal plus ground
  • EPROM partitioned into four 256-bit pages for randomly accessing packetized data
  • Each memory page can be permanently write-protected to prevent tampering
  • Device is an "add only" memory where additional data can be programmed into EPROM without disturbing existing data
  • Architecture allows software to patch data by superseding an old page in favor of a newly programmed page
  • Reduces control, address, data, power, and programming signals to a single data pin
  • 8-bit family code specifies DS1982 communications requirements to reader
  • Reads over a wide voltage range of 2.8V to 6.0V from -40°C to +85°C; programs at 11.5V to 12.0V from -40°C to +50°C
DataSheet
titleDownload file
DS1982 Data SheetDS1982.pdf
Parametrics
Part NumberTechnologyApplicationsMemory TypeMemory SizeUnique WareReal Time ClockBudgetary
Price
See Notes
DS1982iButtonAsset ManagementEPROM1K bitsNoNo$1.74 @1k
Quality and Environmental Data
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
DS1982-F3+ActiveCAN-F3,;2 pin;301 mm²-40°C to +85°CLead Free
DS1982-F5+ActiveCAN-F5,;2 pin;301 mm²-40°C to +85°CLead Free
DS1982.pdf DS1982
DS1982-DS1982-F5_cn.pdf DS1982
DS1982.pdf DS1982
DS1982.pdf DS1982
Understanding the DS1WM Synthesizable 1-Wire Bus Master DS1923
White Paper 5: Using 1-Wire APIs for Data Sheet Commands DS1921K
White Paper 2: Using the 1-Wire® Public Domain Kit DS9097U-S09
1-Wire File Structure DS1923
Reading and Writing 1-Wire® Devices Through Serial Interfaces DS1923
DS1982.pdf DS1982
DS1992-DS1993.pdf DS1992