• 简体中文
• English

DS4106：106.25MHz/212.5MHz/425MHz Clock Oscillators

Fibre Channel Crystal Oscillators Provided in a Miniature 5mm x 3.2mm Ceramic Package

The DS4106, DS4212, and DS4425 ceramic surface-mount crystal oscillators are part of Maxim's DS4-XO series of crystal oscillators. These devices offer output frequencies at 106.25MHz, 212.5MHz, and 425MHz. The clock oscillators are suited for systems with tight tolerances because of the jitter, phase noise, and stability performance. The small package provides a format made for applications where PCB space is critical. These clock oscillators are crystal based and use a fundamental crystal with PLL technology to provide the final output frequencies. Each device is offered with LVDS or LVPECL output types. The output enable pin is active-high logic. These clock oscillators have very low phase jitter and phase noise. Typical phase jitter is < 0.9ps RMS from 12kHz to 20MHz. The devices are designed to operate with a 3.3V ±10% supply voltage, and are available in a 5.0mm x 3.2mm x 1.49mm, 10-pin LCCC surface-mount ceramic package.

Key Features Clock Output Frequencies: DS4106: 106.25MHz DS4212: 212.50MHz DS4425: 425.00MHz Phase Jitter (RMS): 0.9ps Typical LVPECL or LVDS Output Supply Current: 50mA (Typical, Unloaded) at +3.3V Supply (LVPECL) 53mA (Typical) at +3.3V Supply (LVDS) -40°C to +85°C Temperature Range Output Disable

DS4106, DS4212, DS4425: Typical Operating Circuits Applications/Uses Fibre Channel Hard Disk Drives Fibre Channel Switches Host Bus Adapters Raid Controllers

DataSheet

Parametrics

Quality and Environmental Data

• DS4106.pdf

Related Products

• DS4622：DS4-XO Series Clock Oscillators
• DS4311：DS4-XO Series Clock Oscillators
• DS4155：DS4-XO Series Clock Oscillators
• DS4776：DS4-XO Series Clock Oscillators
• DS4312：DS4-XO Series Clock Oscillators
• DS4156：DS4-XO Series Clock Oscillators
• DS4125：DS4-XO Series Clock Oscillators
• DS4026：10MHz to 51.84MHz TCXO
• DS4077：50MHz to 122.88MHz VCXO

Ordering Information