MAX11617：Low-Power, 4-/8-/12-Channel, I²C, 12-Bit ADCs in Ultra-Small Packages
Lowest Power, Smallest Area, I²C, 4-/8-/12-Channel ADCs with Internal Reference
The MAX11612–MAX11617 low-power, 12-bit, multichannel analog-to-digital converters (ADCs) feature internal track/hold (T/H), voltage reference, clock, and an I²C-compatible 2-wire serial interface. These devices operate from a single supply of 2.7V to 3.6V (MAX11613/MAX11615/MAX11617) or 4.5V to 5.5V (MAX11612/MAX11614/MAX11616) and require only 670µA at the maximum sampling rate of 94.4ksps. Supply current falls below 230µA for sampling rates under 46ksps. AutoShutdown™ powers down the devices between conversions, reducing supply current to less than 1µA at low throughput rates. The MAX11612/MAX11613 have 4 analog input channels each, the MAX11614/MAX11615 have 8 analog input channels each, while the MAX11616/MAX11617 have 12 analog input channels each. The fully differential analog inputs are software configurable for unipolar or bipolar, and single-ended or differential operation. The full-scale analog input range is determined by the internal reference or by an externally applied reference voltage ranging from 1V to VDD. The MAX11613/MAX11615/MAX11617 feature a 2.048V internal reference and the MAX11612/MAX11614/MAX11616 feature a 4.096V internal reference. The MAX11612/MAX11613 are available in an 8-pin µMAX® package and the MAX11613 is available in an ultra-small, 1.9mm x 2.2mm, 12-bump wafer-level package (WLP). The MAX11614–MAX11617 are available in a 16-pin QSOP package and in an ultra-small, 2.14mm x 2.0mm, 16-bump wafer level package (WLP). The MAX11612–MAX11617 are guaranteed over the extended temperature range (-40°C to +85°C). For pin-compatible 10-bit parts, refer to the MAX11606–MAX11611 data sheet. For pin-compatible 8-bit parts, refer to the MAX11600–MAX11605 data sheet.
Key Features
| MAX11612, MAX11613, MAX11614, MAX11615, MAX11616, MAX11617: Typical Operating Circuit Applications/Uses
|
DataSheet
| title | Download file |
|---|---|
| MAX11612-MAX11617 Data Sheet | MAX11612-MAX11617.pdf |
Parametrics
| Part Number | Resolution (bits) | Input Chan. | Conv. Rate (ksps) | ADC Architecture | Data Bus | Diff/S.E. Input | Internal VREF (V) | External VREF (V) | External VREF (V) | Unipolar VIN (V) | Bipolar VIN (±V) | SNR (dB) | THD (dB) | INL (±LSB) | Package/Pins | Budgetary Price |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ADC | max | nominal | min | max | max | max | See Notes | |||||||||
| MAX11612 | 12 | 4 | 94.4 | SAR | I2C | Both | 4.096 | 1 | 5.5 | 4.096 | 2.048 | 70 | -78 | 1 | µMAX/8 | $1.52 @1k |
| MAX11613 | 4 | 2.048 | 3.6 | 2.048 | 1.024 | µMAX/8 WLP/12 | $1.44 @1k | |||||||||
| MAX11614 | 8 | 4.096 | 5.5 | 4.096 | 2.048 | QSOP/16 | $3.10 @1k | |||||||||
| MAX11615 | 8 | 2.048 | 3.6 | 2.048 | 1.024 | QSOP/16 WLP/16 | $3.01 @1k | |||||||||
| MAX11616 | 12 | 4.096 | 5.5 | 4.096 | 2.048 | QSOP/16 | $4.39 @1k | |||||||||
| MAX11617 | 12 | 2.048 | 3.6 | 2.048 | 1.024 | QSOP/16 WLP/16 | $4.29 @1k | |||||||||
Design kits & evaluation modules
Quality and Environmental Data
Related Products
- MAX11645：Low-Power, 1-/2-Channel, I²C, 12-Bit ADCs in Ultra-Tiny 1.9mm x 2.2mm Package
- MAX1238：2.7V to 3.6V and 4.5V to 5.5V, Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
Ordering Information
| Part Number | Status | Recommended Replacement | Package | Temp | RoHS |
|---|---|---|---|---|---|
| MAX11617DB+ | No Longer Available | MAX11617EVSYS+ | EVKIT; | -40°C to +85°C | See data sheet |
| MAX11617EEE+ | Active | QSOP,;16 pin;30.9 mm² | -40°C to +85°C | Lead Free | |
| MAX11617EEE+T | Active | QSOP,;16 pin;30.9 mm² | -40°C to +85°C | Lead Free | |
| MAX11617EVKIT+ | No Longer Available | MAX11835TEVS# | EVKIT; | -40°C to +85°C | See data sheet |
| MAX11617EWE+ | Active | WLP,;16 pin;WLP; | -40°C to +85°C | Lead Free | |
| MAX11617EWE+T | Active | WLP,;16 pin;WLP; | -40°C to +85°C | Lead Free |
- MAX11612-MAX11617.pdf MAX11617
- MAX11617.pdf MAX11617
- MAX11612-MAX11617.pdf MAX11614
