• 简体中文
• English

MAX1249：+2.7V to +5.25V, Low-Power, 4-Channel, Serial, 10-Bit ADCs in QSOP-16

The MAX1248/MAX1249 10-bit data-acquisition systems combine a 4-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption. They operate from a single +2.7V to +5.25V supply, and their analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation. The 4-wire serial interface connects directly to SPI™/ QSPI™ and MICROWIRE™ devices without external logic. A serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX1248/MAX1249 use either the internal clock or an external serial-interface clock to perform successive-approximation analog-to-digital conversions. The MAX1248 has an internal 2.5V reference, while the MAX1249 requires an external reference. Both parts have a reference-buffer amplifier with a ±1.5% voltage adjustment range. These devices provide a hard-wired active-low SHDN pin and a software-selectable power-down, and can be programmed to automatically shut down at the end of a conversion. Accessing the serial interface automatically powers up the MAX1248/MAX1249, and the quick turn-on time allows them to be shut down between all conversions. This technique can cut supply current to under 60µA at reduced sampling rates. The MAX1248/MAX1249 are available in a 16-pin DIP and a very small QSOP that occupies the same board area as an 8-pin SO. For 8-channel versions of these devices, see the MAX148/MAX149 datasheet.

Key Features 4-Channel Single-Ended or 2-Channel Differential Inputs Single +2.7V to +5.25V Operation Internal 2.5V Reference (MAX1248) Low Power: 1.2mA (133ksps, +3V supply) 54µA (1ksps, +3V supply) 1µA (power-down mode) SPI/QSPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface Software-Configurable Unipolar or Bipolar Inputs 16-Pin QSOP Package (same area as 8-pin SO)

MAX1248, MAX1249: Typical Operating Circuit Applications/Uses Battery-Powered Applications Data Acquisition Medical Instruments Pen Digitizers Portable Data Logging System Supervision

DataSheet

Parametrics

Quality and Environmental Data

• MAX1249.pdf

Related Products

• MAX11619：10-Bit, 300ksps ADCs with FIFO and Internal Reference
• MAX1046：10-Bit, Multichannel ADCs/DACs with FIFO, Temperature Sensing, and GPIO Ports
• MAX157：+2.7V, Low-Power, 2-Channel, 108ksps, Serial 10-Bit ADCs in 8-Pin µMAX
• MAX159：+2.7V, Low-Power, 2-Channel, 108ksps, Serial 10-Bit ADCs in 8-Pin µMAX
• MAX1247：+2.7V, Low-Power, 4-Channel, Serial 12-Bit ADCs in QSOP-16
• MAX1246：+2.7V, Low-Power, 4-Channel, Serial 12-Bit ADCs in QSOP-16
• MAX149：+2.7V to +5.25V Low-Power 8-Channel Serial 10-Bit ADCs

Ordering Information