MAX14836:24V Dual-Output Sensor Transceiver

Most Feature Rich Dual Sensor Transceiver with Integrated LDOs and < 1.8V Output Voltage Drop

The MAX14836 transceiver is suitable for 24V binary sensors. Additional 24V digital inputs and outputs are provided. Two internal linear regulators generate common sensor power requirements: 5V and 3.3V. On-board DIO and DO drivers are independently configurable for push-pull, high-side (pnp), or low-side (npn) operation. The device detects a wake-up condition and generates a wake-up signal on the active-low WU output. An SPI interface allows configuration and monitoring of the devices. Extensive alarm conditions are detected and communicated through the active-low IRQ output and the SPI interface. The device features reverse-polarity, short-circuit, and thermal protection. All power lines are monitored for undervoltage conditions. Both DIO and DO drivers are specified for sinking/sourcing 200mA. The MAX14836 is available in a 4mm x 4mm, 24-pin TQFN package, and is specified over the -40°C to +105°C temperature range.

Key Features
  • High Configurability and Integration Enable Faster Time-to-Market and Reduce SKUs
    • Push-Pull, High-Side, or Low-Side Outputs
    • DIO and DO Drivers Can Be Connected in Parallel to Increase Current and Reduce Output Resistance
    • 200mA Specified DIO and DO Output Drive
    • 2.5V to 5V Logic Interface Levels
    • 5V and 3.3V Linear Regulators
    • 400μs Wake-Up Detection on DIO Line
    • 3μF DIO Load-Drive Capability
    • 2μF DO Load-Drive Capability
    • EMI Emission Control Through Slew-Controlled Driver
  • Integrated Protection Enables Robust Solutions
    • Reverse-Polarity-Protected 24V Supply Output
    • SPI Interface for Configuration and Monitoring
    • Reverse-Polarity and Short-Circuit Protection on All 24V Inputs/Outputs
    • High-Temperature Warning and Thermal Shutdown
    • Extensive Fault Monitoring and Reporting
    • -40°C to +105°C Operating Temperature Range
  • Space-Saving 4mm x 4mm TQFN Package Saves Circuit Footprint
MAX14836: Typical Application Circuit
MAX14836: Typical Application Circuit
Applications/Uses
  • Industrial Sensors
DataSheet
titleDownload file
MAX14836 Data SheetMAX14836.pdf
Parametrics
Part NumberFunctionsVCC
(V)
VCC
(V)
C/Q
(mA)
DO
(mA)
DI Input Threshold
(V)
DI Input Threshold
(V)
Slew Rate LimitingLogic-Level Supply Voltage
(V)
Integrated PowerProtection FeaturesPackage/PinsOper. Temp.
(°C)
minmaxtyptyphighlow
MAX14836Dual Binary Driver9362002006.8 to 85.2 to 6.4Yes3.3
5
3.3V LDO
5V LDO
High Temp Warning and Shutdown
Reverse Polarity
Short Circuit
UVLO
TQFN/24-40 to +105
Quality and Environmental Data
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX14836GTG+ActiveTQFN,;24 pin;16.8 mm²-40°C to +105°CLead Free
MAX14836GTG+TActiveTQFN,;24 pin;16.8 mm²-40°C to +105°CLead Free
MAX14836.pdf MAX14836
MAX14836.pdf MAX14836
MAX14836.pdf MAX14836
MAX14836.pdf MAX14836
MAX14836.pdf MAX14836