• 简体中文
• English

MAX14839：24V Pin-Configurable Industrial Sensor Output Drivers

Simplify and Shrink Sensor Designs by 25x

The MAX14838/MAX14839 24V/100mA drivers are optimized for use in industrial sensors. These devices integrate all of the high-voltage (24V) circuitry commonly found in industrial sensors, including a configurable PNP/ NPN/push-pull driver and an integrated linear regulator that meets common sensor power requirements. The MAX14838/MAX14839 are pin-configurable. Logic inputs allow the driver to be configured for high-side (PNP), low-side (NPN), or push-pull operation. An additional input allows the user to select between normally-open and normally-closed logic. The MAX14838 features an onboard 5V linear regulator, while the MAX14839 features a 3.3V linear regulator. Each device includes two LED drivers for visual feedback. One LED driver reflects the output logic status and the other is a general-purpose driver that can be used to signal a fault condition. The DO output, supply (VCC), and ground (GND) pins are reverse polarity-protected and are protected against IEC ESD and surge events. The MAX14838 and MAX14839 operate from a wide supply range and are available in a 12-pin TDFN-EP package (3mm x 3mm) or a 12-bump wafer-level package (WLP) (2.1mm x 1.6mm) and operate over the -40°C to +105°C temperature range.

Key Features High Configurability Simplifies Design Pin-Selectable High-Side (PNP), Low-Side (NPN), or Push-Pull Driver Pin-Configurable NO/NC Logic Integrated Protection Provides Robust Sensor Solutions Reverse-Polarity Protection on DO, VCC, and GND 4.75V to 34V Supply Range (MAX14839) Driver is Short-Circuit Protected Active-Low FAULT Output for Fault Indication VCC Hot Plug Protection Thermal Shutdown Protection ±1kV/500Ω Surge Protection ±8kV IEC 61000-4-2 Air Gap ESD Protection ±6kV IEC 61000-4-2 Contact ESD Protection -40°C to +105°C Temperature Range Fast Turn-Off of Inductive Loads Up to 1.5H Saves Space on Board Available in 12-Pin TDFN-EP (3mm x 3mm) or 12-Bump WLP (2.1mm x 1.6mm) Dual Integrated 2mA LED Drivers

MAX14838, MAX14839: Typical Application Circuit Applications/Uses Capacitive and Inductive Sensors Industry Binary Sensors Proximity Switches

DataSheet

Parametrics

Quality and Environmental Data

• MAX14839.pdf

Related Products

• MAX14832：One-Time Programmable Industrial Sensor Output Driver

Ordering Information