• 简体中文
• English

MAX1494：3.5- and 4.5-Digit, Single-Chip ADCs with LCD Drivers

The MAX1492/MAX1494 low-power, 3.5- and 4.5-digit, analog-to-digital converters (ADCs) with integrated liquid crystal display (LCD) drivers operate from a single 2.7V to 5.25V power supply. They include an internal reference, a high-accuracy on-chip oscillator, and a triplexed LCD driver. An internal charge pump generates the negative supply needed to power the integrated input buffer for single-supply operation. The ADCs are configurable for either a ±2V or ±200mV input range and outputs its conversion results to an LCD and/or to a microcontroller (µC). µC communication is facilitated through an SPI™-/QSPI™-/MICROWIRE®-compatible serial interface. The MAX1492 is a 3.5-digit (±1999 count) device, and the MAX1494 is a 4.5-digit (±19,999 count) device. The MAX1492/MAX1494 do not require external-precision integrating capacitors, autozero capacitors, crystal oscillators, charge pumps, or other circuitry required with dual-slope ADCs (commonly used in panel meter circuits). These devices also feature on-chip buffers for the differential signal and reference inputs, allowing direct interface with high-impedance signal sources. In addition, they use continuous internal-offset calibration and offer > 100dB simultaneous rejection of 50Hz and 60Hz line noise. Other features include data hold and peak hold, overrange and underrange detection, and a low-battery monitor. The MAX1494 comes in a 32-pin, 7mm x 7mm LQFP package, and the MAX1492 comes in 28-pin SSOP and 28-pin PDIP packages. All devices in this family operate over the 0°C to +70°C commercial temperature range.

Key Features High Resolution MAX1494: 4.5 Digits (±19,999 Count) MAX1492: 3.5 Digits (±1999 Count) Sigma-Delta ADC Architecture No Integrating Capacitors Required No Autozeroing Capacitors Required > 100dB of Simultaneous 50Hz and 60Hz Rejection Operate from a Single 2.7V or 5.25V Supply Selectable Input Range of ±200mV or ±2V Selectable Voltage Reference: Internal 2.048V or External Internal High-Accuracy Oscillator Needs No External Components Automatic Offset Calibration Low Power Maximum 960µA Operating Current Maximum 400µA Shutdown Current Small 32-Pin 7mm x 7mm LQFP Package (4.5 Digits), 28-Pin SSOP Package (3.5 Digits) Triplexed LCD Driver SPI-/QSPI-/MICROWIRE-Compatible Serial Interface Evaluation Kit Available (Order MAX1494EVKIT)

MAX1492, MAX1494: Typical Operating Circuit Applications/Uses Digital Multimeters Digital Panel Meters Digital Voltmeters Handheld meters

DataSheet

Parametrics

Design kits & evaluation modules

• MAX1494EVKIT

Related Products

• MAX1496：3.5- and 4.5-Digit, Single-Chip ADCs with LED Drivers
• MAX1447：3.5- and 4.5-Digit, Single-Chip ADCs with LED Drivers
• MAX1498：3.5- and 4.5-Digit, Single-Chip ADCs with LED Drivers
• MAX1499：3.5- and 4.5-Digit, Single-Chip ADCs with LED Drivers and µC Interface
• MAX1497：3.5- and 4.5-Digit, Single-Chip ADCs with LED Drivers and µC Interface
• MAX1495：3.5- and 4.5-Digit, Single-Chip ADCs with LCD Drivers
• MAX1493：3.5- and 4.5-Digit, Single-Chip ADCs with LCD Drivers
• MAX1491：3.5- and 4.5-Digit, Single-Chip ADCs with LCD Drivers

Ordering Information