• 简体中文
• English

MAX15301AA02：InTune Automatically Compensated Digital PoL Controller with Driver and PMBus Telemetry

Only Digital Power IC To Meet Transient and Light-Load Efficiency Performance Metrics Set by Analog Controllers

The MAX15301AA02 is a full-featured, highly efficient, digital point-of-load (PoL) controller with advanced power management and telemetry features. Unlike PID-based digital power regulators, the MAX15301AA02 uses Maxim’s patented InTune™ automatically compensated, state-space control algorithm. The InTune control law is valid for both the small- and large-signal response and accounts for duty-cycle saturation effects. These capabilities result in fast loop transient response and reduce the number of output capacitors compared to competing digital controllers. The MAX15301AA02 includes multiple features to optimize efficiency. An internal switch BabyBuck™ regulator generates the gate drive and the internal bias supplies for the controller with low power loss. An advanced, high-efficiency MOSFET gate driver has adjustable nonoverlap timing and load-variable gate-drive voltage to minimize switching losses over the full range of voltage, current, and temperature. The MAX15301AA02 was designed for end-customer’s design environment. An on-board PMBus™-compliant serial bus interface enables communication with a supervisory controller for monitoring and fault management. A full suite of power management features eliminates the need for complicated and expensive sequencing and monitoring ICs. Basic DC-DC conversion operation can be set up via pin strapping and does not require user configuration firmware. This allows for rapid development of the power-supply subsystem before board-level systems engineering is completed. Maxim provides support hardware and software for configuring the IC. The MAX15301AA02 is available in a 32-lead, 5mm x 5mm TQFN package and operates over the -40°C to +85°C temperature range.

Key Features InTune Automatic Compensation Ensures Stability While Optimizing Transient Performance State-Space Compensation Results in Fast Transient Response with Reduced Output Capacitance Differential Remote Voltage Sensing Enables ±1% VOUT Accuracy over Temperature (-40°C to +85°C) PMBus Interface for Configuration, Control, and Monitoring Supports Voltage Positioning High Output 2A/4A MOSFET Driver Adjustable Nonoverlap Timing Variable Gate-Drive Voltage Wide Input Range of 4.5V to 14V Efficient On-Chip BabyBuck Regulator for Self-Bias Output Voltage Range from 0.5V to 5.25V Startup into a Prebiased Output Configurable Soft-Start and Soft-Stop Time Fixed-Frequency Operation and Synchronization Flexible Sequencing and Fault Management Pin-Strappable Configuration Output Voltage, SMBus Address, Switching Frequency, Current Limit Out-of-the-Box Operation Enables Fast Prototyping

MAX15301AA02: Typical Operating Circuit Applications/Uses Base-Station Equipment Power Modules Routers/Switches Servers Storage Systems

DataSheet

Parametrics

Design kits & evaluation modules

• MAX15301EVKITHP

Ordering Information