• 简体中文
• English

MAX1910：1.5x/2x High-Efficiency White LED Charge Pumps

The MAX1910/MAX1912 power LEDs with a regulated output voltage or current (up to 120mA) from an unregulated input supply (2.7V to 5.3V). These are complete DC-DC converters requiring only four small ceramic capacitors and no inductors. Input ripple is minimized by a unique regulation scheme that maintains a fixed 750kHz switching frequency over a wide load range. Also included are logic-level shutdown and soft-start to reduce input current surges at startup. The MAX1910 has two automatically selected operating modes: 1.5x and 2x. 1.5x mode improves efficiency at higher input voltages, while 2x mode maintains regulation at lower input voltages. The MAX1912 operates only in 1.5x mode. The MAX1910 and the MAX1912 are available in a space-saving 10-pin µMAX package.

Key Features High-Efficiency 1.5x/2x Charge Pumps Low Input Ripple with 750kHz Operation 200mV Current-Sense Threshold Reduces Power Loss Current- or Voltage-Regulated Charge Pump Up to 120mA Output Current No Inductors Required Small Ceramic Capacitors Regulated ±5% LED Current Load Disconnected in Shutdown 1µA Shutdown Current Small 10-Pin µMAX Package

MAX1910, MAX1912: Typical Operating Circuit Applications/Uses Backup Battery Boost Converters Cell Phones Digital Still Cameras MP3 Players PDAs White LED Backlighting

DataSheet

Parametrics

Design kits & evaluation modules

• MAX1910EVKIT

Ordering Information