• 简体中文
• English

MAX2309：CDMA IF VGAs and I/Q Demodulators with VCO and Synthesizer

Complete CDMA IF Subsystem

The MAX2306/MAX2308/MAX2309 are IF receivers designed for dual-band, dual-mode, and single-mode N-CDMA and W-CDMA cellular phone systems. The signal path consists of a variable-gain amplifier (VGA) and I/Q demodulator. The devices feature guaranteed +2.7V operation, a gain control range of over 110dB, and high input IP3 (-31dBm at 35dB gain, 3.4dBm at -35dB gain). Unlike similar devices, the MAX2306 family of receivers includes dual oscillators and synthesizers to form a self-contained IF subsystem. The synthesizer's reference and RF dividers are fully programmable through a 3-wire serial bus, enabling dual-band system architectures using any common reference and IF frequency. The differential baseband outputs have enough bandwidth to suit both N-CDMA and W-CDMA systems, and offer saturated output levels of 2.7Vp-p at a low +2.75V supply voltage. Including the low-noise voltage-controlled oscillator (VCO) and synthesizer, the MAX2306 draws only 26mA from a +2.75V supply in CDMA (differential IF) mode. The MAX2306/MAX2308/MAX2309 are available in 28-pin QFN packages.

Key Features Complete IF Subsystem Includes VCO and Synthesizer Supports Dual-Band, Triple-Mode Operation VGA with >110dB Gain Control Quadrature Demodulator High Output Level (2.7V) Programmable Charge-Pump Current Supports Any IF Frequency Between 40MHz and 300MHz 3-Wire Programmable Interface Low Supply Voltage (+2.7V)

MAX2306, MAX2308, MAX2309: Functional Diagram Applications/Uses Globalstar Dual-Mode Handsets Single/Dual/Triple-Mode CDMA Handsets WCDMA Handsets Wireless Data Links Wireless Local Loop (WLL)

DataSheet

Parametrics

Design kits & evaluation modules

• MAX2306EVKIT
• MAX2308EVKIT
• MAX2309EVKIT

Quality and Environmental Data

• MAX2309.pdf

Ordering Information