MAX2680:400MHz to 2.5GHz, Low-Noise, SiGe Downconverter Mixers

The MAX2680/MAX2681/MAX2682 miniature, low-cost, low-noise downconverter mixers are designed for low-voltage operation and are ideal for use in portable communications equipment. Signals at the RF input port are mixed with signals at the local oscillator (LO) port using a double-balanced mixer. These downconverter mixers operate with RF input frequencies between 400MHz and 2500MHz, and downconvert to IF output frequencies between 10MHz and 500MHz. The MAX2680/MAX2681/MAX2682 operate from a single +2.7V to +5.5V supply, allowing them to be powered directly from a 3-cell NiCd or a 1-cell Lithium battery. These devices offer a wide range of supply currents and input intercept (IIP3) levels to optimize system performance. Additionally, each device features a low-power shutdown mode in which it typically draws less than 0.1µA of supply current. Consult the Selector Guide for various combinations of IIP3 and supply current. The MAX2680/MAX2681/MAX2682 are manufactured on a high-frequency, low-noise, advanced silicon-germanium process and are offered in the space-saving 6-pin SOT23 package.

Key Features
  • 400MHz to 2.5GHz Operation
  • +2.7V to +5.5V Single-Supply Operation
  • Low Noise Figure: 6.3dB at 900MHz (MAX2680)
  • High Input Third-Order Intercept Point (IIP3 at 2450MHz)
    • -6.9dBm at 5.0mA (MAX2680)
    • +1.0dBm at 8.7mA (MAX2681)
    • +3.2dBm at 15.0mA (MAX2682)
  • < 0.1µA Low-Power Shutdown Mode
  • Ultra-Small Surface-Mount Packaging
MAX2680, MAX2681, MAX2682: Typical Operating Circuit
MAX2680, MAX2681, MAX2682: Typical Operating Circuit
Applications/Uses
  • 400MHz/900MHz/2.4GHz ISM-Band Radios
  • Cell Phones/Cordless Phones
  • IEEE 802.11 and Wireless Data
  • Personal Communications Systems (PCS)
  • Wireless Local Loop (WLL)
DataSheet
titleDownload file
MAX2680-MAX2682 Data SheetMAX2680-MAX2682.pdf
Parametrics
Part NumberChannelsRF Freq.
(MHz)
RF Freq.
(MHz)
LO Freq.
(MHz)
LO Freq.
(MHz)
IF Freq.
(MHz)
IF Freq.
(MHz)
Gain
(dB)
Input IP3
(dBm)
Noise Figure
(dB)
VCC
(V)
3.3V Supply Current
(mA)
Footprint
(mm x mm)
Package/PinsBudgetary
Price
minmaxminmaxminmaxSee Notes
MAX26801400250040025001050011.6-12.96.32.7 to 5.552.7 x 2.9SOT/6$0.72 @1k
MAX268114.2-6.178.7SOT/6$0.88 @1k
MAX268214.7-1.86.515SOT/6$0.92 @1k
Design kits & evaluation modules
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX2680AUT+ActiveSOT,;6 pin;9 mm²-40°C to +125°CLead Free
MAX2680AUT+TActiveSOT,;6 pin;9 mm²-40°C to +125°CLead Free
MAX2680EUTNo Longer AvailableMAX2680EUT+SOT,;6 pin;9 mm²-40°C to +85°CNo
MAX2680EUT+ActiveSOT,;6 pin;9 mm²-40°C to +85°CLead Free
MAX2680EUT+TActiveSOT,;6 pin;9 mm²-40°C to +85°CLead Free
MAX2680EUT-TNo Longer AvailableMAX2680EUT+TSOT,;6 pin;9 mm²-40°C to +85°CNo
MAX2680-MAX2682.pdf MAX2682
MAX2680-MAX2682.pdf MAX2682