• 简体中文
• English

MAX3060E：±15kV ESD-Protected, Fail-Safe, 20Mbps, Slew-Rate-Limited RS-485/RS-422 Transceivers in a SOT

Industry's First RS-485/RS-422 Transceivers in SOT Packaging Save 70% Board Space

The MAX3060E/MAX3061E/MAX3062E high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These devices feature fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receiver output is a logic high if all transmitters on a terminated bus are disabled (high impedance). These devices also feature hot-swap circuitry that eliminates data glitches during hot insertion. The MAX3060E features slew-rate-limited drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission up to 115kbps. The MAX3061E, also slew-rate limited, transmits up to 500kbps. The MAX3062E driver is not slew-rate limited, allowing transmit speeds up to 20Mbps. All transmitter outputs are protected to ±15kV using the Human Body Model. These transceivers typically draw 910µA of supply current when unloaded, or 790µA when fully loaded with the drivers disabled. All devices have a 1/8-unit-load receiver input impedance that allows up to 256 transceivers on the bus. These devices are intended for half-duplex communication.

Key Features True Fail-Safe Receiver While Maintaining EIA/TIA-485 Compatibility Enhanced Slew-Rate Limiting Facilitates Error-Free Data Transmission (MAX3060E and MAX3061E) 1nA Low-Current Shutdown Mode Hot-Swappable for Telecom Applications ESD Protection: ±15kV Human Body Model Allow Up to 256 Transceivers on the Bus Space-Saving 8-Pin SOT23 Package

MAX3060E, MAX3061E, MAX3062E: Typical Operating Circuit Applications/Uses Industrial Control Local Area Networks Level Translators RS-422/RS-485 Communications Transceivers for EMI-Sensitive Applications

DataSheet

Parametrics

Quality and Environmental Data

• MAX3060E.pdf

Related Products

• MAX3362：3.3V, High-Speed, RS-485/RS-422 Transceiver in SOT Package
• MAX3080E：±15kV ESD-Protected, Fail-Safe, High-Speed (10Mbps), Slew-Rate-Limited RS-485/RS-422 Transceivers
• MAX3089E：±15kV ESD-Protected, Fail-Safe, High-Speed (10Mbps), Slew-Rate-Limited RS-485/RS-422 Transceivers

Ordering Information