MAX3301E:USB On-the-Go Transceivers and Charge Pumps

First ±15kV ESD-Protected USB On-the-Go Transceiver and Charge Pump

The MAX3301E/MAX3302E fully integrated USB On-the-Go (OTG) transceivers and charge pumps allow mobile devices such as PDAs, cellular phones, and digital cameras to interface directly with USB peripherals and each other without the need of a host PC. Use the MAX3301E/MAX3302E with an embedded USB host to directly connect to peripherals such as printers or external hard drives. The MAX3301E/MAX3302E integrate a USB OTG transceiver, a VBUS charge pump, a linear regulator, and an I²C-compatible, 2-wire serial interface. An internal level shifter allows the MAX3301E/MAX3302E to interface with +1.65V to +3.6V logic supply voltages. The MAX3301E/MAX3302E's OTG-compliant charge pump operates with +3V to +4.5V input supply voltages, and supplies an OTG-compatible output on VBUS while sourcing more than 8mA of output current. The MAX3301E/MAX3302E enable USB OTG communication from highly integrated digital devices that cannot supply or tolerate the +5V VBUS levels that USB OTG requires. The device supports USB OTG session-request protocol (SRP) and host-negotiation protocol (HNP). The MAX3301E/MAX3302E provide built-in ±15kV electrostatic-discharge (ESD) protection for the VBUS, ID_IN, D+, and D- terminals. The MAX3301E/MAX3302E are available in 25-bump chip-scale (UCSP™), 25-bump WLP package, 28-pin TQFN, and 32-pin TQFN packages and operate over the extended -40°C to +85°C temperature range.

Key Features
  • USB 2.0-Compliant Full-/Low-Speed OTG Transceivers
  • Ideal for USB On-the-Go, Embedded Host, or Peripheral Devices
  • ±15kV ESD Protection on ID_IN, VBUS, D+, and D-Terminals
  • Charge Pump for VBUS Signaling and Operation Down to 3V
  • Internal VBUS and ID Comparators
  • Internal Switchable Pullup and Pulldown Resistors for Host/Peripheral Functionality
  • I²C Bus Interface with Command and Status Registers
  • Linear Regulator Powers Internal Circuitry and D+/D- Pullup Resistors
  • Supports SRP and HNP
MAX3301E, MAX3302E: Typical Operating Circuit
MAX3301E, MAX3302E: Typical Operating Circuit
Applications/Uses
  • Digital Cameras
  • Mobile Phones
  • MP3 Players
  • PDAs
DataSheet
titleDownload file
MAX3301E-MAX3302E Data SheetMAX3301E-MAX3302E.pdf
Parametrics
Part NumberVL
(V)
ESD Protect.
(±kV)
Internal OTG Charge PumpInternal Xcvr.VSUPPLY
(V)
Package/PinsOper. Temp.
(°C)
Budgetary
Price
See Notes
MAX3302E1.65 to 3.615YesNo3.0 to 4.5TQFN/28
UCSP/25
WLP/25
-40 to +85$2.58 @1k
MAX3301ETQFN/32
UCSP/25
WLP/25
$2.72 @1k
Quality and Environmental Data
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX3301EEBA-TNo Longer AvailableUCSP,;25 pin;6.9 mm²-40°C to +85°CNo
MAX3301EETJNo Longer AvailableMAX3301EETJ+TQFN,;32 pin;26 mm²-40°C to +85°CNo
MAX3301EETJ+ActiveTQFN,;32 pin;26 mm²-40°C to +85°CLead Free
MAX3301EETJ+TActiveTQFN,;32 pin;26 mm²-40°C to +85°CLead Free
MAX3301EETJ-TNo Longer AvailableMAX3301EETJ+TTQFN,;32 pin;26 mm²-40°C to +85°CNo
MAX3301EEWA+TNo Longer AvailableWLP,;25 pin;6.8 mm²-40°C to +85°CLead Free
MAX3301E-MAX3302E.pdf MAX3302E
MAX3301E-MAX3302E_cn.pdf MAX3302E
MAX3301E.pdf MAX3301E
MAX3301E-MAX3302E_cn.pdf MAX3301E