MAX4265:Ultra-Low-Distortion, Single-Supply, 300MHz Op Amps with Enable

Lowest-Distortion Single +5V 300MHz ADC Drivers

The MAX4265–MAX4270 ultra-low distortion, voltage-feed-back op amps are capable of driving a 100Ω load while maintaining ultra-low distortion over a wide bandwidth. They offer superior spurious-free dynamic range (SFDR) performance: -90dBc at 5MHz and -59dBc at 100MHz (MAX4269). Additionally, input voltage noise density is 8nV/ while operating from a single +4.5V to +8.0V supply or from dual ±2.25V to ±4.0V supplies. These features make the MAX4265–MAX4270 ideal for use in high-performance communications and signal-processing applications that require low distortion and wide bandwidth. The MAX4265 single and MAX4268 dual amplifiers are unity-gain stable. The MAX4266 single and MAX4269 dual amplifiers are compensated for a minimum stable gain of +2V/V, while the MAX4267 single and MAX4270 dual amplifiers are compensated for a minimum stable gain of +5V/V. For additional power savings, these amplifiers feature a low-power disable mode that reduces supply current and places the outputs in a high-impedance state. The MAX4265/MAX4266/MAX4267 are available in a space-saving 8-pin µMAX® package, and the MAX4268/MAX4269/MAX4270 are available in a 16-pin QSOP package.

Key Features
  • Operates from +4.5V to +8.0V
  • Superior SFDR with 100Ω Load
    • -90dBc (fC = 5MHz)
    • -59dBc (fC = 100MHz)
  • 35dBm IP3 (fC = 20MHz)
  • 8nV/ Voltage Noise Density
  • 100MHz 0.1dB Gain Flatness (MAX4268)
  • 900V/µs Slew Rate
  • ±45mA Output Driving Capability
  • Disable Mode Places Outputs in High-Impedance State
MAX4265, MAX4266, MAX4267, MAX4268, MAX4269, MAX4270: Pin Configurations
MAX4265, MAX4266, MAX4267, MAX4268, MAX4269, MAX4270: Pin Configurations
Applications/Uses
  • Base-Station Amplifiers
  • High-Frequency ADC Drivers
  • High-Frequency Signal Processing
  • High-Speed DAC Buffers
  • IF Amplifiers
  • RF Telecom Applications
DataSheet
titleDownload file
MAX4265-MAX4270 Data SheetMAX4265-MAX4270.pdf
Parametrics
Part NumberAmps.Single SupplyBW
(MHz)
ISUPPLY
(mA)
IOUT
(mA)
Slew Rate
(V/µs)
en
(nV/√Hz)
AVVSUPPLY
(V)
VSUPPLY
(V)
Oper. Temp.
(°C)
Package/PinsBudgetary
Price
@ -3dBtypmin<minminmaxSee Notes
MAX42651Yes4002830900814.58-40 to +85µMAX/8
SOIC(N)/8
$2.85 @1k
MAX426613502µMAX/8
SOIC(N)/8
$2.85 @1k
MAX426823001QSOP/16
SOIC(N)/14
-
Related Products
  • MAX4387:+3V/+5V, 250MHz, SOT23 ADC Buffer Amplifiers with High-Speed Disable
  • MAX4388:+3V/+5V, 250MHz, SOT23 ADC Buffer Amplifiers with High-Speed Disable
  • MAX4288:+3V/+5V, 250MHz, SOT23 ADC Buffer Amplifiers with High-Speed Disable
  • MAX4286:+3V/+5V, 250MHz, SOT23 ADC Buffer Amplifiers with High-Speed Disable
  • MAX4287:+3V/+5V, 250MHz, SOT23 ADC Buffer Amplifiers with High-Speed Disable
  • MAX4285:+3V/+5V, 250MHz, SOT23 ADC Buffer Amplifiers with High-Speed Disable
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX4265ESANo Longer AvailableMAX4265ESA+SOIC(N),;8 pin;30.9 mm²-40°C to +85°CNo
MAX4265ESA+ActiveSOIC(N),;8 pin;30.9 mm²-40°C to +85°CLead Free
MAX4265ESA+TActiveN.SO;8 pin-40°C to +85°CSee data sheet
MAX4265ESA-TNo Longer AvailableMAX4265ESA+TN.SO;8 pin-40°C to +85°CSee data sheet
MAX4265EUANo Longer AvailableMAX4265EUA+µMAX,;8 pin;15.6 mm²-40°C to +85°CNo
MAX4265EUA+ActiveµMAX,;8 pin;15.6 mm²-40°C to +85°CLead Free
MAX4265EUA+TActiveµMAX,;8 pin;15.6 mm²-40°C to +85°CLead Free
MAX4265EUA-TNo Longer AvailableMAX4265EUA+TµMAX,;8 pin;15.6 mm²-40°C to +85°CNo
MAX4265-MAX4270.pdf MAX4268
MAX4265-MAX4270.pdf MAX4270