MAX4474:Single/Dual/Quad, +1.8V/750nA, SC70, Rail-to-Rail Op Amps

Sub-µA (750nA) Op Amp Extends Battery Life

The MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 family of micropower op amps operate from a single +1.8V to +5.5V supply and draw only 750nA of supply current. The MAX4470 family feature ground-sensing inputs and rail-to-rail output. The ultra-low supply current, low-operating voltage, and rail-to-rail output capabilities make these operational amplifiers ideal for use in single lithium ion (Li+), or two-cell NiCd or alkaline battery systems. The rail-to-rail output stage of the MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 amplifiers is capable of driving the output voltage to within 4mV of the rail with a 100kΩ load, and can sink and source 11mA with a +5V supply. These amplifiers are available in both fully compensated and decompensated versions. The single MAX4470, dual MAX4471, and the quad MAX4472 are unity-gain stable. The single MAX4464 and the dual MAX4474 are stable for closed-loop gain configurations of ≥ +5V/V. These amplifiers are available in space-saving WLP, SC70, SOT23, µMAX®, and TSSOP packages.

Key Features
  • Ultra-Low 750nA Supply Current Per Amplifier
  • Ultra-Low +1.8V Supply Voltage Operation
  • Ground-Sensing Input Common-Mode Range
  • Outputs Swing Rail-to-Rail
  • Outputs Source and Sink 11mA of Load Current
  • No Phase Reversal for Overdriven Inputs
  • High 120dB Open-Loop Voltage Gain
  • Low 500µV Input Offset Voltage
  • 9kHz Gain-Bandwidth Product (MAX4470/MAX4471/MAX4472)
  • 40kHz Gain-Bandwidth Product (MAX4464/MAX4474)
  • 250pF (min) Capacitive Load Capability
  • Available in Tiny, 6-Bump WLP, 5-Pin SC70, and 8-Pin SOT23 Packages
MAX4464, MAX4470, MAX4471, MAX4472, MAX4474: Pin Configurations
MAX4464, MAX4470, MAX4471, MAX4472, MAX4474: Pin Configurations
Applications/Uses
  • Badges
  • Battery-Powered Systems
  • Cellular Handsets
  • Digital Cameras (DIGICAMs)
  • Electrometer Amplifiers
  • Glucose Meters
  • GPS Solutions
  • IP Camera
  • Micropower
  • MP3 and Portable Media Players
  • Pagers and Cellphones
  • pH Meters
  • Portable Instrumentation
  • Remote Sensor Active
  • Solar-Powered Systems
  • Thermostats
DataSheet
titleDownload file
MAX4464-MAX4474 Data SheetMAX4464-MAX4474.pdf
Parametrics
Part NumberAmps.Rail to RailVSUPPLY (Total)
(V)
VSUPPLY (Total)
(V)
ICC per Amp.
(µA)
VOS
(µV)
CMRR @DC
(dB)
PSRR @DC
(dB)
Input IBIAS
(nA)
Unity Gain BW
(MHz)
Slew Rate
(V/µs)
en
(nV/√Hz)
Package/PinsBudgetary
Price
minmaxtypmaxtyptypmaxtyptyp<See Notes
MAX44641Output Only1.85.50.75700095901.50.040.02120SC-70/5
SOT/5
$0.75 @1k
MAX447010.0090.002SC-70/5
SOT/5
WLP/6
$0.94 @1k
MAX447120.0090.002SOIC(N)/8
SOT/8
$0.90 @1k
MAX447240.0090.002SOIC(N)/14
TSSOP/14
$1.58 @1k
MAX447420.040.02µMAX/8
SOIC(N)/8
SOT/8
$1.22 @1k
Design kits & evaluation modules
Related Products
  • MAX406:Single, Dual, Quad, 1.2µA Max, Single-Supply Op Amps
  • MAX4040:Single/Dual/Quad, Low-Cost, SOT23, Micropower Rail-to-Rail I/O Op Amps
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX4474EKA+ActiveSOT,;8 pin;9 mm²-40°C to +85°CLead Free
MAX4474EKA+TActiveSOT,;8 pin;9 mm²-40°C to +85°CLead Free
MAX4474EKA-TNo Longer AvailableMAX4474EKA+TSOT,;8 pin;9 mm²-40°C to +85°CNo
MAX4474ESANo Longer AvailableMAX4474ESA+SOIC(N),;8 pin;30.9 mm²-40°C to +85°CNo
MAX4474ESA+ActiveSOIC(N),;8 pin;30.9 mm²-40°C to +85°CLead Free
MAX4474ESA+TNo Longer AvailableN.SO;-40°C to +85°CSee data sheet
MAX4474ESA-TNo Longer AvailableN.SO;8 pin-40°C to +85°CSee data sheet
MAX4474EUANo Longer AvailableMAX4474EUA+µMAX,;8 pin;15.6 mm²-40°C to +85°CNo
MAX4474EUA+ActiveµMAX,;8 pin;15.6 mm²-40°C to +85°CLead Free
MAX4474EUA+TActiveµMAX,;8 pin;15.6 mm²-40°C to +85°CLead Free
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX4474EUA-TNo Longer AvailableMAX4474EUA+TuMAX;8 pin-40°C to +85°CSee data sheet
MAX4464-MAX4474.pdf MAX4474
MAX4464-MAX4474.pdf MAX4474