MAX5062, MAX5062A:125V/2A, High-Speed, Half-Bridge MOSFET Drivers

The MAX5062/MAX5063/MAX5064 high-frequency, 125V half-bridge, n-channel MOSFET drivers drive high-and low-side MOSFETs in high-voltage applications. These drivers are independently controlled and their 35ns typical propagation delay, from input to output, are matched to within 3ns (typ). The high-voltage operation with very low and matched propagation delay between drivers, and high source/sink current capabilities in a thermally enhanced package make these devices suitable for the high-power, high-frequency telecom power converters. The 125V maximum input voltage range provides plenty of margin over the 100V input transient requirement of telecom standards. A reliable on-chip bootstrap diode connected between VDD and BST eliminates the need for an external discrete diode. The MAX5062A/C and the MAX5063A/C offer both noninverting drivers (see the Selector Guide of the full data sheet). The MAX5062B/D and the MAX5063B/D offer a noninverting high-side driver and an inverting low-side driver. The MAX5064A/B offer two inputs per driver that can be either inverting or noninverting. The MAX5062A/B/C/D and the MAX5064A feature CMOS (VDD / 2) logic inputs. The MAX5063A/B/C/D and the MAX5064B feature TTL logic inputs. The MAX5064A/B include a break-before-make adjustment input that sets the dead time between drivers from 16ns to 95ns. The drivers are available in the industry-standard 8-pin SO footprint and pin configuration, and a thermally enhanced 8-pin SO and 12-pin (4mm x 4mm) thin QFN packages. All devices operate over the -40°C to +125°C automotive temperature range.

Key Features
  • HIP2100/HIP2101 Pin Compatible (MAX5062A/MAX5063A)
  • Up to 125V Input Operation
  • 8V to 12.6V VDD Input Voltage Range
  • 2A Peak Source and Sink Current Drive Capability
  • 35ns Typical Propagation Delay
  • Guaranteed 8ns Propagation Delay Matching Between Drivers
  • Programmable Break-Before-Make Timing (MAX5064)
  • Up to 1MHz Combined Switching Frequency while Driving 100nC Gate Charge (MAX5064)
  • Available in CMOS (VDD / 2) or TTL Logic-Level Inputs with Hysteresis
  • Up to 15V Logic Inputs Independent of Input Voltage
  • Low 2.5pF Input Capacitance
  • Instant Turn-Off of Drivers During Fault or PWM Start-Stop Synchronization (MAX5064)
  • Low 200µA Supply Current
  • Versions Available With Combination of Noninverting and Inverting Drivers (MAX5062B/D and MAX5063B/D)
  • Available in 8-Pin SO, Thermally Enhanced SO,and 12-Pin Thin QFN Packages
MAX5062, MAX5062A, MAX5063, MAX5063A, MAX5064, MAX5064A, MAX5064B: Typical Operating Circuit
MAX5062, MAX5062A, MAX5063, MAX5063A, MAX5064, MAX5064A, MAX5064B: Typical Operating Circuit
Applications/Uses
  • Active-Clamp Forward Converters
  • Full-Bridge Converters
  • Motor Control
  • Power-Supply Modules
  • Telecom Half-Bridge Power Supplies
  • Two-Switch Forward Converters
DataSheet
titleDownload file
MAX5062-MAX5064B Data SheetMAX5062-MAX5064B.pdf
Parametrics
Part NumberDriverDriverHigh Side Volt.
(V)
VSUPPLY
(V)
ISOURCE / ISINK
(A)
tPD
(ns)
Logic InputOper. Temp.
(°C)
Package/PinsBudgetary
Price
High SideLow SidetyppeaktypSee Notes
MAX5062ANon-InvertingNon-Inverting1258.0 to 12.62 / 230CMOS-40 to +125SOIC(N)-EP/8
SOIC(N)/8
$1.46 @1k
MAX5062BNon-InvertingInverting30CMOSSOIC(N)-EP/8
SOIC(N)/8
$4.59 @1k
MAX5062CNon-InvertingNon-Inverting30CMOSSOIC(N)-EP/8
SOIC(N)/8
$4.59 @1k
MAX5062DNon-InvertingInverting30CMOSSOIC(N)-EP/8
SOIC(N)/8
$2.34 @1k
MAX5063ANon-InvertingNon-Inverting35TTLSOIC(N)-EP/8
SOIC(N)/8
$1.46 @1k
MAX5063BNon-InvertingInverting35TTLSOIC(N)-EP/8
SOIC(N)/8
$1.46 @1k
MAX5063CNon-InvertingNon-Inverting35TTLSOIC(N)-EP/8
SOIC(N)/8
$1.46 @1k
MAX5063DNon-InvertingInverting35TTLSOIC(N)-EP/8
SOIC(N)/8
$4.59 @1k
MAX5064AInverting
Non-Inverting
Inverting
Non-Inverting
30CMOSTQFN/12$2.12 @1k
MAX5064BInverting
Non-Inverting
Inverting
Non-Inverting
35TTLTQFN/12$1.46 @1k
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX5062AASANo Longer AvailableMAX5062AASA+SOIC(N),;8 pin;30.9 mm²-40°C to +125°CNo
MAX5062AASA+ActiveMAX15024SOIC(N),;8 pin;30.9 mm²-40°C to +125°CLead Free
MAX5062AASA+TActiveMAX15024SOIC(N),;8 pin;30.9 mm²-40°C to +125°CLead Free
MAX5062AASA-TNo Longer AvailableMAX5062AASA+TN.SO;8 pin-40°C to +125°CSee data sheet
MAX5062BASANo Longer AvailableMAX5062BASA+SOIC(N),;8 pin;30.9 mm²-40°C to +125°CNo
MAX5062BASA+ActiveMAX15024SOIC(N),;8 pin;30.9 mm²-40°C to +125°CLead Free
MAX5062BASA+TNo Longer AvailableMAX15024N.SO;8 pin-40°C to +125°CSee data sheet
MAX5062BASA-TNo Longer AvailableN.SO;8 pin-40°C to +125°CSee data sheet
MAX5062CASANo Longer AvailableMAX5062CASA+SOIC(N)-EP,;8 pin;30.9 mm²-40°C to +125°CNo
MAX5062CASA+ActiveMAX15024SOIC(N)-EP,;8 pin;30.9 mm²-40°C to +125°CLead Free
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX5062CASA+TNo Longer AvailableMAX15024N.SO;8 pin-40°C to +125°CSee data sheet
MAX5062CASA-TNo Longer AvailableN.SO;8 pin-40°C to +125°CSee data sheet
MAX5062DASANo Longer AvailableMAX5062DASA+SOIC(N)-EP,;8 pin;30.9 mm²-40°C to +125°CNo
MAX5062DASA+ActiveMAX15024SOIC(N)-EP,;8 pin;30.9 mm²-40°C to +125°CLead Free
MAX5062DASA+TNo Longer AvailableMAX15024N.SO;8 pin-40°C to +125°CSee data sheet
MAX5062DASA-TNo Longer AvailableN.SO;8 pin-40°C to +125°CSee data sheet