MAX5180:Dual, 10-Bit, 40MHz, Current/Voltage Simultaneous-Output DACs

The MAX5180 contains two 10-bit, simultaneous-update, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5183 provides equal specifications, with on-chip precision resistors for voltage output operation. The devices are designed for 10pV-s glitch operation to minimize unwanted spurious signal components at the output. An on-board 1.2V bandgap circuit provides a well-regulated, low-noise reference that can be disabled for external reference operation. The MAX5180/MAX5183 are designed to provide a high level of signal integrity for the least amount of power dissipation. The DACs operate from a single supply of 2.7V to 3.3V. Additionally, these DACs have three modes of operation: normal, low-power standby, and complete shutdown, which provides the lowest possible power dissipation with 1µA (max) shutdown current. A fast wake-up time (0.5µs) from standby mode to full DAC operation conserves power by activating the DACs only when required. The MAX5180/MAX5183 are packaged in a 28-pin QSOP and are specified for the extended (-40°C to +85°C) temperature range. For lower-resolution, dual 8-bit versions, refer to the MAX5186/MAX5189 data sheet.

Key Features
  • 2.7V to 3.3V Single-Supply Operation
  • Wide Spurious-Free Dynamic Range: 70dB at fOUT = 2.2MHz
  • Fully Differential Outputs for Each DAC
  • ±0.5% FSR Gain Mismatch
  • ±0.2° Phase Mismatch
  • Low-Current Standby or Full-Shutdown Modes
  • Internal 1.2V Low-Noise Bandgap Reference
  • Small 28-Pin QSOP Package
MAX5180, MAX5183: Functional Diagram
MAX5180, MAX5183: Functional Diagram
Applications/Uses
  • Arbitrary Waveform Generation (AWG)
  • Digital Signal Processing (DSP)
  • Imaging
  • Signal Reconstruction of I and Q Transmit
  • Signals
DataSheet
titleDownload file
MAX5180-MAX5183 Data SheetMAX5180-MAX5183.pdf
Parametrics
Part NumberResolution
(bits)
fCLK
(Msps)
ChannelsSFDR
(dBc)
THD
(dBc)
DNL
(±LSB)
INL
(±LSB)
PDISS
(mW)
InterfaceVSUPPLY
(V)
Package/PinsBudgetary
Price
@ fOUT@ fOUTSee Notes
MAX51801040270 @ 2.2MHz-68 @ 2.2MHz0.50.520.7Parallel3QSOP/28$4.66 @1k
MAX5183QSOP/28
Design kits & evaluation modules
Quality and Environmental Data
Related Products
  • MAX5186:Dual, 8-Bit, 40MHz, Current/Voltage, Simultaneous-Output DACs
  • MAX5189:Dual, 8-Bit, 40MHz, Current/Voltage, Simultaneous-Output DACs
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX5180BEEINo Longer AvailableMAX5180BEEI+QSOP,;28 pin;61.9 mm²-40°C to +85°CNo
MAX5180BEEI+ActiveQSOP,;28 pin;61.9 mm²-40°C to +85°CLead Free
MAX5180BEEI+TActiveQSOP,;28 pin;61.9 mm²-40°C to +85°CLead Free
MAX5180BEEI-TNo Longer AvailableMAX5180BEEI+TQSOP,;28 pin;61.9 mm²-40°C to +85°CNo
MAX5180-MAX5183.pdf MAX5183
MAX5180.pdf MAX5180
MAX5180-MAX5183.pdf MAX5183