MAX5435:32-Tap, Nonvolatile, I²C, Linear, Digital Potentiometers

32-Tap, Nonvolatile, I²C, Linear-Taper, Digital Potentiometers Perform the Function of a Mechanical Potentiometer, but Replace the Mechanics with a Simple 2-Wire Serial Interface

The MAX5432–MAX5435 nonvolatile, linear-taper, digital potentiometers perform the function of a mechanical potentiometer, but replace the mechanics with a simple 2-wire serial interface. Each device performs the same function as a discrete potentiometer or a variable resistor and has 32 tap points. The MAX5432–MAX5435 feature an internal, nonvolatile, electrically erasable programmable read-only memory (EEPROM) that returns the wiper to its previously stored position at power-up. The fast-mode I²C-compatible serial interface allows communication at data rates up to 400kbps, minimizing board space and reducing interconnection complexity. Each device is available with multiple factory-preset I²C addresses (see the Ordering Information/Selector Guide in the full data sheet). Use the MAX5432–MAX5435 in applications requiring digitally controlled resistors. Two resistance values are available (50kΩ and 100kΩ) in a voltage-divider or variable resistor configuration. The nominal resistor temperature coefficient is 35ppm/°C end-to-end, and only 5ppm/°C ratiometric, making the devices ideal for applications requiring a low-temperature-coefficient variable resistor such as low-drift, programmable-gain amplifier circuit configurations. The MAX5432/MAX5433 are available in a 3mm x 3mm 8-pin TDFN package and the MAX5434/MAX5435 are available in a 6-pin thin SOT23 package. The MAX5432–MAX5435 are specified over the extended (-40°C to +85°C) temperature range.

Key Features
  • Tiny 3mm x 3mm 8-Pin TDFN and 6-Pin Thin SOT23 Packages
  • Power-On Recall of Wiper Position from Nonvolatile Memory
  • 35ppm/°C End-to-End Resistance Temperature Coefficient
  • 5ppm/°C Ratiometric Temperature Coefficient
  • 50kΩ/100kΩ Resistor Values
  • Fast 400kbps I²C-Compatible Serial Interface
  • 500nA (typ) Static Supply Current
  • +2.7V to +5.25V Single-Supply Operation
  • 32 Tap Positions
  • ±0.15 LSB INL (typ), ±0.15 LSB DNL (typ)
MAX5432, MAX5433, MAX5434, MAX5435: Typical Operating Circuit
MAX5432, MAX5433, MAX5434, MAX5435: Typical Operating Circuit
Applications/Uses
  • Liquid-Crystal Display (LCD) Screen Adjustment
  • Low-Drift Programmable-Gain Amplifiers
  • Mechanical Potentiometer Replacements
  • Volume Control
DataSheet
titleDownload file
MAX5432-MAX5435 Data SheetMAX5432-MAX5435.pdf
Parametrics
Part NumberTaperPOTsControl InterfaceWiper MemoryStepsREND-TO-END
(kΩ)
Res. Tol.
(%)
Temp. Coeff.
(ppm/°C)
Wiper Resistance
(Ω)
ICC @5V
(µA)
Package/PinsBudgetary
Price
typtypmaxSee Notes
MAX5432Linear12-Wire SerialNon-Volatile325025356102TDFN-EP/8$0.76 @1k
MAX5433100TDFN-EP/8
MAX543450TSOT/6
MAX5435100TSOT/6
Design kits & evaluation modules
Quality and Environmental Data
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX5435LEZT+ActiveTSOT,;6 pin;8.3 mm²-40°C to +85°CLead Free
MAX5435LEZT+TActiveTSOT,;6 pin;8.3 mm²-40°C to +85°CLead Free
MAX5435LEZT-TNo Longer AvailableMAX5435LEZT+TTSOT,;6 pin;8.3 mm²-40°C to +85°CNo
MAX5435MEZT+ActiveTSOT,;6 pin;8.3 mm²-40°C to +85°CLead Free
MAX5435MEZT+TActiveTSOT,;6 pin;8.3 mm²-40°C to +85°CLead Free
MAX5435MEZT-TNo Longer AvailableMAX5435MEZT+TTSOT,;6 pin;8.3 mm²-40°C to +85°CNo
MAX5435NEZT+TNo Longer AvailableTSOT,;6 pin;8.3 mm²-40°C to +85°CLead Free
MAX5435PEZT+TNo Longer AvailableTSOT,;6 pin;8.3 mm²-40°C to +85°CLead Free
MAX5432-MAX5435.pdf MAX5435
MAX5435.pdf MAX5435
MAX5432-MAX5435.pdf MAX5435