MAX5822:Dual, 12-Bit, Low-Power, 2-Wire, Serial Voltage-Output DAC

The MAX5822 is a dual, 12-bit, voltage-output, digital-to-analog converter (DAC) with an I²C-compatible, 2-wire interface that operates at clock rates up to 400kHz. The device operates from a single 2.7V to 5.5V supply and draws only 115µA at Vdd = 3.6V. A power-down mode decreases current consumption to less than 1µA. The MAX5822 features three software-selectable power-down output impedances: 100kΩ, 1kΩ, and high impedance. Other features include internal precision rail-to-rail output buffers and a power-on reset (POR) circuit that powers up the DAC in the 100kΩ power-down mode. The MAX5822 features a double-buffered I²C-compatible serial interface that allows multiple devices to share a single bus. All logic inputs are CMOS-logic compatible and buffered with Schmitt triggers, allowing direct interfacing to optocoupled and transformer-isolated interfaces. The MAX5822 minimizes digital noise feedthrough by disconnecting the clock (SCL) signal from the rest of the device when an address mismatch is detected. The MAX5822 is specified over the extended temperature range of -40°C to +85°C and is available in a miniature 8-pin µMAX® package. Refer to the MAX5821 data sheet for the 10-bit version and the MAX5820 data sheet for the 8-bit version.

Key Features
  • Ultra-Low Supply Current
    • 115µA at Vdd = 3.6V
    • 135µA at Vdd = 5.5V
  • 300nA Low-Power Power-Down Mode
  • Single 2.7V to 5.5V Supply Voltage
  • Fast 400kHz I²C-Compatible 2-Wire Serial Interface
  • Schmitt-Trigger Inputs for Direct Interfacing to Optocouplers
  • Rail-to-Rail Output Buffer Amplifiers
  • Three Software-Selectable Power-Down Output Impedances
    • 100kΩ, 1kΩ, and High Impedance
  • Read-Back Mode for Bus and Data Checking
  • Power-On Reset to Zero
  • 8-Pin µMAX Package
MAX5822: Typical Operating Circuit
MAX5822: Typical Operating Circuit
Applications/Uses
  • Battery-Powered Instrumentation
  • Digital Gain and Offset Adjustments
  • Low-Cost Instrumentation
  • Programmable Attenuators
  • Programmable Voltage and Current Sources
  • VCO/Varactor Diode Control
DataSheet
titleDownload file
MAX5822 Data SheetMAX5822.pdf
Parametrics
Part NumberResolution
(bits)
ChannelsOutput TypeReferenceINL
(±LSB)
InterfaceSupply Range
(V)
Supply Range
(V)
ICC
(mA)
Settling Time
(µs)
Package/PinsOper. Temp.
(°C)
Budgetary
Price
maxminmaxmaxtypSee Notes
MAX5822122Voltage- BufferedExt.16Serial - I2C2.75.50.2154µMAX/8-40 to +85$6.90 @1k
Quality and Environmental Data
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX5822LEUANo Longer AvailableMAX5822LEUA+µMAX,;8 pin;15.6 mm²-40°C to +85°CNo
MAX5822LEUA+ActiveµMAX,;8 pin;15.6 mm²-40°C to +85°CLead Free
MAX5822LEUA+TActiveµMAX,;8 pin;15.6 mm²-40°C to +85°CLead Free
MAX5822LEUA-TNo Longer AvailableMAX5822LEUA+TµMAX,;8 pin;15.6 mm²-40°C to +85°CNo
MAX5822MEUANo Longer AvailableMAX5822MEUA+µMAX,;8 pin;15.6 mm²-40°C to +85°CNo
MAX5822MEUA+ActiveµMAX,;8 pin;15.6 mm²-40°C to +85°CLead Free
MAX5822MEUA+TActiveµMAX,;8 pin;15.6 mm²-40°C to +85°CLead Free
MAX5822MEUA-TNo Longer AvailableMAX5822MEUA+TµMAX,;8 pin;15.6 mm²-40°C to +85°CNo
MAX5822.pdf MAX5822
MAX5822.pdf MAX5822
MAX5822.pdf MAX5822
Damage from a Lightning Bolt or a Spark—It Depends on How Tall You Are! MAX5484
How Signal Chains and PLCs Impact Our Lives MAX5421
Typically Testing “Typical” in a Typical Manner MX7847
MAX5822.pdf MAX5822
典型工作电路功能原理框图 MAX5822