• 简体中文
• English

MAX5873：12-Bit, 200Msps, High-Dynamic-Performance, Dual DAC with CMOS Inputs

The MAX5873 is an advanced 12-bit, 200Msps, dual digital-to-analog converter (DAC). This DAC meets the demanding performance requirements of signal synthesis applications found in wireless base stations and other communications applications. Operating from 3.3V and 1.8V supplies, this dual DAC offers exceptional dynamic performance such as 78dBc spurious-free dynamic range (SFDR) at fOUT = 16MHz and supports update rates of 200Msps, with a power dissipation of only 255mW. The MAX5873 utilizes a current-steering architecture that supports a 2mA to 20mA full-scale output current range, and allows a 0.1VP-P to 1VP-P differential output voltage swing. The MAX5873 features an integrated 1.2V bandgap reference and control amplifier to ensure high-accuracy and low-noise performance. A separate reference input (REFIO) allows for the use of an external reference source for optimum flexibility and improved gain accuracy. The digital and clock inputs of the MAX5873 accept 3.3V CMOS voltage levels. The MAX5873 features a flexible input data bus that allows for dual-port input or a single-interleaved data port. The MAX5873 is available in a 68-pin QFN package with an exposed paddle (EP) and is specified for the extended temperature range (-40°C to +85°C). Refer to the MAX5874 and MAX5875 data sheets for pin-compatible 14-bit and 16-bit versions of the MAX5873, respectively. Refer to the MAX5876 for an LVDS-compatible version of the MAX5873. See a parametric table of the complete family of pin-compatible 12-/14-/16-bit high-speed DACs.

Key Features 200Msps Output Update Rate Noise Spectral Density = -152dBFS/Hz at fOUT = 16MHz Excellent SFDR and IMD Performance SFDR = 78dBc at fOUT = 16MHz (to Nyquist) SFDR = 73dBc at fOUT = 80MHz (to Nyquist) IMD = -85dBc at fOUT = 10MHz IMD = -74dBc at fOUT = 80MHz ACLR = 74dB at fOUT = 61MHz 2mA to 20mA Full-Scale Output Current CMOS-Compatible Digital and Clock Inputs On-Chip 1.2V Bandgap Reference Low 255mW Power Dissipation 68-Lead QFN-EP Package Evaluation Kit Available (MAX5873EVKIT)

MAX5873: Pin Configuration Applications/Uses Automated Test Equipment (ATE) Base Stations: Single-Carrier UMTS, CDMA, GSM Cable Modem Termination Systems (CMTS) Communications: Fixed Broadband Wireless Access, Point-to-Point Microwave Direct Digital Synthesis (DDS) Instrumentation

DataSheet

Parametrics

Design kits & evaluation modules

• MAX5873EVKIT
• MAX5874EVKIT
• MAX5875EVKIT

Quality and Environmental Data

• MAX5873.pdf

Ordering Information