• 简体中文
• English

MAX6801：3-Pin, Low-Power µP Reset Circuits

3-Pin/4-Pin, Low-Power uP Reset Circuits with Manual Reset

The MAX6800/MAX6801/MAX6802 microprocessor (µP) supervisory circuits monitor the power supplies in 2.85V to 5.0V µP and digital systems. They increase circuit reliability and reduce cost by eliminating external components and adjustments. These devices perform a single function—they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping it asserted for a preset timeout period after VCC has risen above the reset threshold. The only difference among the three devices is their output. The MAX6801 (push/pull) and MAX6802 (open-drain) have an active-low RESET output, while the MAX6800 (push/pull) has an active-high RESET output. The MAX6800/MAX6801 are guaranteed to be in the correct state for VCC down to 0.7V. The MAX6802 is guaranteed to be in the correct state for VCC down to 1.0V. The reset comparator in these ICs is designed to ignore fast transients on VCC. Reset thresholds are factory-trimmable between 2.63V and 4.80V, in approximately 100mV increments. These devices are available with a 1ms (min), 20ms (min), or 100ms (min) reset pulse width. Ideal for space-critical applications, the MAX6800/MAX6801/MAX6802 come packaged in a 3-pin SOT23. For a lower threshold voltage version, see the MAX6332/MAX6333/MAX6334.

Key Features Ultra-Low 0.7V Operating Supply Voltage Low 4.0µA Supply Current Precision Monitoring of 2.85V to 5.0V Power-Supply Voltages Reset Thresholds Available from 2.63V to 4.80V, in Approximately 100mV Increments Fully Specified over Temperature Three Power-On Reset Timeout Periods Available (1ms min, 20ms min, 100ms min) Low Cost Three Available Output Structures: Push/Pull RESET, Push/Pull active-low RESET, Open-Drain active-low RESET Guaranteed RESET/active-low RESET Valid to VCC = 0.7V (MAX6800/MAX6801) Power-Supply Transient Immunity No External Components Required 3-Pin SOT23 Package Pin Compatible with MAX809/MAX810, MAX6326/MAX6327/MAX6328, and MAX6346/MAX6347/MAX6348

MAX6800, MAX6801, MAX6802: Typical Operating Circuit Applications/Uses Automotive ABS Automotive Passenger Compartment Bridges Building Energy Management (HVAC) Cable Modems Cell Phone Base Stations Cell Phones Computers: Desktop, Workstation, Server Consumer Audio Digital Still Cameras Digital Television (Receivers, Set-Top Boxes) Global Positioning Systems (GPS) Handy Terminals Network Hubs, Switches, Routers Notebook Computers Pagers Palmtop Computers PDAs and Organizers Pen Entry Palmtops Point-of-Sale Terminals Portable Patient Monitoring/Drug Delivery Routers/Switches Storage Systems Test Measurement Systems Wireless Data

DataSheet

Parametrics

Quality and Environmental Data

• MAX6801.pdf

Related Products

• MAX809：3-Pin Microprocessor Reset Circuits
• MAX810：3-Pin Microprocessor Reset Circuits
• MAX811：4-Pin µP Voltage Monitors with Manual Reset Input
• MAX6333：3-Pin, Ultra-Low-Voltage, Low-Power µP Reset Circuits
• MAX6332：3-Pin, Ultra-Low-Voltage, Low-Power µP Reset Circuits
• MAX6334：3-Pin, Ultra-Low-Voltage, Low-Power µP Reset Circuits
• MAX6335：4-Pin, Ultra Low-Voltage, Low-Power µP Reset Circuits with Manual Reset
• MAX6336：4-Pin, Ultra Low-Voltage, Low-Power µP Reset Circuits with Manual Reset
• MAX6337：4-Pin, Ultra Low-Voltage, Low-Power µP Reset Circuits with Manual Reset
• MAX6346：3-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits
• MAX6327：3-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits
• MAX6328：3-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits
• MAX6326：3-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits
• MAX6347：3-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits
• MAX6348：3-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits

Ordering Information