MAX7322:I²C Port Expander with 4 Push-Pull Outputs and 4 Inputs

Low Operating Supply Voltage I²C Port Expander with 4 Push-Pull Outputs and 4 Input Ports

The MAX7322 2-wire serial-interfaced peripheral features four push-pull outputs and four input ports with selectable internal pullups. Input ports are overvoltage protected to +6V and feature transition detection with interrupt output. The four input ports are continuously monitored for state changes (transition detection). The interrupt is latched, allowing detection of transient changes. Any combination of inputs can be selected using the interrupt mask to assert the open-drain active-low INT output. When the MAX7322 is subsequently accessed through the serial interface, any pending interrupt is cleared. The four push-pull outputs are rated to sink 20mA, and are capable of driving LEDs. The active-low RST input clears the serial interface, terminating any I²C communication to or from the MAX7322. The MAX7322 uses two address inputs with four-level logic to allow 16 I²C slave addresses. The slave address also sets the power-up default logic state for the four output ports, and enables or disables internal 40kΩ pullups for the input ports. The MAX7322 is one device in a family of pin-compatible port expanders with a choice of input ports, open-drain I/O ports, and push-pull output ports (see Table 1 in the full data sheet). The MAX7322 is available in 16-pin QSOP and TQFN packages, and is specified over the -40°C to +125°C automotive temperature range.

Key Features
  • 400kHz I²C Serial Interface
  • +1.71V to +5.5V Operation Voltage
  • 4 Push-Pull Output Ports Rated at 20mA Sink Current
  • 4 Input Ports with Maskable, Latching Transition Detection
  • Input Ports are Overvoltage Protected to +6V
  • Transient Changes are Latched, Allowing Detection Between Read Operations
  • Active-Low INT Output Alerts Change on Any Selection of Inputs
  • AD0 and AD2 Inputs Select from 16 Slave Addresses
  • Low 0.6µA (typ) Standby Current
  • -40°C to +125°C Operating Temperature Range
MAX7322: Typical Application Circuit
MAX7322: Typical Application Circuit
  • Cell Phones
  • Notebooks
  • Satellite Radio
  • Servers
titleDownload file
MAX7322 Data SheetMAX7322.pdf
Part NumberInterfaceInputsOutputsReset InputInterr.OutOver Voltage Protection
Drive Current
minmaxSee Notes
MAX7322Serial - I2C Compatible
Serial 2-Wire 400kbit
$1.85 @1k
Design kits & evaluation modules
Quality and Environmental Data
Related Products
  • MAX7323:I²C Port Expander with 4 Push-Pull Outputs and 4 Open-Drain I/Os
  • MAX7326:I²C Port Expander with 12 Push-Pull Outputs and Four Inputs
  • MAX7324:I²C Port Expander with Eight Push-Pull Outputs and Eight Inputs
  • MAX7322:I²C Port Expander with 4 Push-Pull Outputs and 4 Inputs
  • MAX7327:I²C Port Expander with 12 Push-Pull Outputs and 4 Open-Drain I/Os
  • MAX7320:I²C Port Expander with Eight Push-Pull Outputs
  • MAX7328:I²C Port Expanders with Eight I/O Ports
  • MAX7329:I²C Port Expanders with Eight I/O Ports
  • MAX7319:I²C Port Expander with Eight Inputs and Maskable Transition Detection
  • MAX7321:I2C Port Expander with 8 Open-Drain I/Os
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX7322AEENo Longer AvailableMAX7322AEE+QSOP,;16 pin;30.9 mm²-40°C to +125°CNo
MAX7322AEE+ActiveQSOP,;16 pin;30.9 mm²-40°C to +125°CLead Free
MAX7322AEE+TActiveQSOP,;16 pin;30.9 mm²-40°C to +125°CLead Free
MAX7322AEE-TNo Longer AvailableMAX7322AEE+TQSOP;16 pin-40°C to +125°CSee data sheet
MAX7322ATENo Longer AvailableMAX7322ATE+TQFN,;16 pin;9.6 mm²-40°C to +125°CNo
MAX7322ATE+ActiveTQFN,;16 pin;9.6 mm²-40°C to +125°CLead Free
MAX7322ATE+TActiveTQFN,;16 pin;9.6 mm²-40°C to +125°CLead Free
MAX7322ATE-TNo Longer AvailableMAX7322ATE+TQFN;16 pin-40°C to +125°CSee data sheet
MAX7322.pdf MAX7322
MAX7322_cn.pdf MAX7322
MAX7322.pdf MAX7322
MAX7322.pdf MAX7322
MAX7322.pdf MAX7322
MAX7322_cn.pdf MAX7322