MAX8528：1.425V to 3.6V Input, 2A, 0.2V Dropout LDO Regulators

The MAX8526/MAX8527/MAX8528 low-dropout linear regulators operate from input voltages as low as 1.425V and are able to deliver up to 2A of continuous output current with a maximum dropout voltage of only 200mV. The output voltage can be set from 0.5V to (VIN - 0.2V) and is 1.4% accurate over load and line variations, from 0°C to +85°C. These regulators use small, 2.2µF ceramic input capacitors and 10µF ceramic output capacitors to deliver 2A output current. High bandwidth provides excellent transient response and limits the output voltage deviation to 45mV for a 20mA to 2A load step, with only a 10µF ceramic output capacitor, and the voltage deviations can be reduced further by increasing the output capacitor. Designed with an internal p-channel MOSFET pass transistor, the MAX8526/MAX8527/MAX8528 feature low 500µA typical supply current during dropout conditions. Soft-start reduces inrush current. Other features include a logic-controlled shutdown mode, short-circuit protection, and thermal-overload protection. The MAX8527 features a power-OK (POK) output that transitions high when the regulator output is within ±10% of its nominal output voltage. The MAX8528 features a 150ms power-on reset (POR) output. The parts are packaged in a 14-pin TSSOP package, which includes an exposed pad for optimal power dissipation.

Key Features

1.425V to 3.6V Input Voltage Range
Guaranteed 200mV Dropout at 2A Output Current
±0.6% Initial Accuracy
±1.4% Output Accuracy over Load/Line/Temperature (0°C to +85°C)
Compatible with Ceramic Capacitors
Fast Transient Response
440µA Operating Supply Current
< 50µA Shutdown Supply Current
Short-Circuit Protection
Thermal-Overload Protection
Soft-Start Limits Inrush Current
5mm x 6.4mm Footprint, 1.1mm Profile

MAX8526, MAX8527, MAX8528: Typical Operating Circuit

Applications/Uses

Automated Test Equipment (ATE)
Networking
Notebooks
Optical Modules
PDAs
Post Regulators
Servers
Storage
Wireless Base Stations

DataSheet

title	Download file
MAX8526-MAX8528 Data Sheet	MAX8526-MAX8528.pdf

Parametrics

Part Number	Regulators	V_IN (V)	V_IN (V)	Adj. V_OUT (V)	Adj. V_OUT (V)	V_DROPOUT @Rated I_LOAD (V)	Rated I_LOAD (mA)	Rated I_LOAD (mA)	I_CC (µA)	Low Batt./ Pwr. Fail Out	POK/Reset Thresh. (V)	Watchdog	Reverse Batt. Protect.	Oper. Temp. (°C)	Package/Pins	Budgetary Price
Part Number	Regulators	min	max	min	max	typ	Rated I_LOAD (mA)	Rated I_LOAD (mA)	max	Low Batt./ Pwr. Fail Out	nom	Watchdog	Reverse Batt. Protect.	Oper. Temp. (°C)	Package/Pins	See Notes
MAX8526	1	1.4	3.6	0.5	3.4	0.1	2000	2000	800	No	-	No	No	-40 to +85	TSSOP-EP/14	$2.17 @1k
MAX8527											Vout-10%				TSSOP-EP/14 TSSOP/14	$2.17 @1k
MAX8528											Vout-10%				TSSOP-EP/14	$2.04 @1k

Design kits & evaluation modules

MAX8526EVKIT

Ordering Information

Part Number	Status	Recommended Replacement	Package	Temp	RoHS
MAX8528EUD	No Longer Available	MAX8528EUD+	TSSOP-EP,;14 pin;33.2 mm²	-40°C to +85°C	No
MAX8528EUD+	Active		TSSOP-EP,;14 pin;33.2 mm²	-40°C to +85°C	Lead Free
MAX8528EUD+T	Active		TSSOP-EP,;14 pin;33.2 mm²	-40°C to +85°C	Lead Free
MAX8528EUD-T	No Longer Available	MAX8528EUD+T	TSSOP;14 pin	-40°C to +85°C	See data sheet