MAX907:Dual/Quad/Single, High-Speed, Ultra-Low-Power, Single-Supply TTL Comparators

The MAX907/MAX908/MAX909 are dual/quad/single, high-speed, ultra-low-power voltage comparators designed for use in systems powered from a single +5V supply; the MAX909 also accepts dual ±5V supplies. Their 40ns propagation delay (with 5mV input overdrive) is achieved with a power consumption of only 3.5mW per comparator. The wide input common-mode range extends from 200mV below ground (below the negative supply rail for the MAX909) to within 1.5V of the positive supply rail. Because they are micropower, high-speed comparators that operate from a single +5V supply and include built-in hysteresis, these devices replace a variety of older comparators in a wide range of applications. MAX907/MAX908/MAX909 outputs are TTL-compatible, requiring no external pullup circuitry. All inputs and outputs can be continuously shorted to either supply rail without damage. These easy-to-use comparators incorporate internal hysteresis to ensure clean output switching even when the devices are driven by a slow-moving input signal. The MAX909 features complementary outputs and an output latch. A separate supply pin for extending the analog input range down to -5V is also provided. The dual MAX907 and single MAX909 are available in 8-pin DIP and SO packages, and the quad MAX908 is available in 14-pin DIP and SO packages. These comparators are ideal for single +5V-supply applications that require the combination of high speed, precision, and ultra-low power dissipation.

Key Features
  • 40ns Propagation Delay
  • 700µA (3.5mW) Supply Current per Comparator
  • Single 4.5V to 5.5V Supply Operation (or ±5V, MAX909 only)
  • Wide Input Range Includes Ground (or -5V, MAX909 only)
  • Low, 500µV Offset Voltage
  • Internal Hysteresis Provides Clean Switching
  • TTL-Compatible Outputs (Complementary on MAX909)
  • Input and Output Short-Circuit Protection
  • Internal Latch (MAX909 only)
MAX907, MAX908: Pin Configuration
MAX907, MAX908: Pin Configuration
Applications/Uses
  • Battery-Powered Systems
  • High-Speed A/D Converters
  • High-Speed Sampling Circuits
  • High-Speed V/F Converters
  • Line Receivers
  • Threshold Detectors/Discriminators
  • Zero-Crossing Detectors
DataSheet
titleDownload file
MAX907-MAX909 Data SheetMAX907-MAX909.pdf
Parametrics
Part NumberComp-
arators
tPD
(ns)
Input RangeVSUPPLY (Total)
(V)
VSUPPLY (Total)
(V)
ICC per Comp.
(µA)
VOS
(mV)
VOS
(mV)
Logic OutOper. Temp.
(°C)
Package/PinsBudgetary
Price
typminmaxmaxtypmaxSee Notes
MAX907240to Neg. Rail4.51110000.52Push-Pull-55 to +125
-40 to +85
0 to +70
CDIP(N)/8
PDIP(N)/8
SOIC(N)/8
$1.89 @1k
MAX9084CDIP(N)/14
PDIP(N)/14
SOIC(N)/14
$3.08 @1k
Quality and Environmental Data
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX907C/DNRNDDICE SALES,;NA pin;DICE S;0°C to +70°CSee data sheet
MAX907CPANo Longer AvailableMAX907CPA+PDIP(N),;8 pin;79.7 mm²0°C to +70°CNo
MAX907CPA+ActivePDIP(N),;8 pin;79.7 mm²0°C to +70°CLead Free
MAX907CSANo Longer AvailableMAX907CSA+SOIC(N),;8 pin;30.9 mm²0°C to +70°CNo
MAX907CSA+ActiveSOIC(N),;8 pin;30.9 mm²0°C to +70°CLead Free
MAX907CSA+TActiveSOIC(N),;8 pin;30.9 mm²0°C to +70°CLead Free
MAX907CSA-TNo Longer AvailableMAX907CSA+TSOIC(N),;8 pin;30.9 mm²0°C to +70°CNo
MAX907EPANo Longer AvailableMAX907EPA+PDIP(N),;8 pin;79.7 mm²-40°C to +85°CNo
MAX907EPA+ActivePDIP(N),;8 pin;79.7 mm²-40°C to +85°CLead Free
MAX907ESANo Longer AvailableMAX907ESA+SOIC(N),;8 pin;30.9 mm²-40°C to +85°CNo
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX907ESA+ActiveSOIC(N),;8 pin;30.9 mm²-40°C to +85°CLead Free
MAX907ESA+TActiveSOIC(N),;8 pin;30.9 mm²-40°C to +85°CLead Free
MAX907ESA-TNo Longer AvailableMAX907ESA+TSOIC(N),;8 pin;30.9 mm²-40°C to +85°CNo
MAX907MJANo Longer AvailableCDIP(N),;8 pin;82.6 mm²-55°C to +125°CNo
MAX907MSA/PR+ActiveSOIC(N),;8 pin;30.9 mm²-55°C to +125°CLead Free
MAX907MSA/PR+TActiveSOIC(N),;8 pin;30.9 mm²-55°C to +125°CLead Free
MAX907-MAX909.pdf MAX908
MAX907.pdf MAX907
MAX907-MAX909.pdf MAX909